closed position

closed position什么意思,closed position翻译

基本解释

un.: 停止位置；封闭状态；封闭性局面
网络: 关闭位置；闭合位置；闭合的位置

英汉解释

• 封闭性局面

• 封闭状态

• 停止位置

例句

• To prepare for the next exposure, the front curtain returns to its normal closed position.

  为准备下一次曝光，前幕帘复位。

• The hand wheel is always in the same position relative to the valve body regardless of whether the valve is in the open or closed position.

  不管阀门是在开启或是关闭位置，手轮总是处在相对于阀体的同样的位置。

• When locked in the closed position, the system controlled by the lockout valve cannot be operated until the padlock is removed.

  当在关闭位置锁定，系统控制的锁定阀不能工作，直到锁被删除。

• Where valves must be locked out for safety reasons, valve can be locked in the open or closed position.

  由于安全要求必须将阀门锁住的地方，阀门可以被锁在开启或关闭的位置。

• A backup stem seal for a gate valve retains pressure in the body when the valve is in the closed position.

  一种用于闸阀的备用阀杆密封件，其在所述阀处于闭合位置时保持阀体内的压力。

• when the coil to form a power outage, back in the spring and fluid pressure, the spool back to the closed position, the engine shutdown.

  当线圈组建断电时，在弹簧回复力和液压力作用下，阀芯回到关闭位置，发动机关机。

• Two inductive sensors mounted one on top of another in one housing give a precise indication of the open and closed position of a valve.

  两个电感式传感器叠加安装于一个外壳中，精确显示了阀门的开关位置。

• A shutoff gate is associated with each connecting trough and movable between an open position and a closed position.

  阻断闸板与每条连接槽相关联且可在打开位置与关闭位置之间移动。

• After fitting of the valve, the valve should be maintained in a closed position to prevent any contamination from entering the cylinder.

  连接好阀门后，阀门应保持关闭位置，为防止任何污染进入气瓶。

• An assembly structured to selectively orient a seal between an open position and a closed position.

  一组件，其构造成在打开位置和关闭位置之间有选择地定向一密封件。