红联Linux门户
Linux帮助

智能DNS安装与配置

发布时间:2006-08-15 15:59:55来源:红联作者:hfh08
  注:对于配置智能DNS,主要用途为:1、解决网通与电信问题 2、实现区域规划(不同区域访问各自最近的服务器),下面以解决网通与电信连接问题的配置。至于实现2的功能,只需稍加更改即可。

一、DNS服务器安装......................................................................................... 1

二、named.conf的配置....................................................................................... 2

三、更新根区文件:.......................................................................................... 3

四、建立启动脚本:.......................................................................................... 4

五、添加一个NS............................................................................................... 5

六、添加一个域名.............................................................................................. 5

附:获取IP地址范围方法:................................................................................. 7




一、DNS服务器安装


1、 软件列表

BIND 9.3.2

ftp://ftp.isc.org/isc/bind9/9.3.2/bind-9.3.2.tar.gz

2、 安装BIND 9

安装BIND9:

# tar zxvf bind-9.3.2.tar.gz

# cd bind-9.3.2

# ./configure

--prefix=/usr/local/named

--disable-ipv6

# make && make install

建立BIND用户:

# groupadd bind

# useradd -g bind -d /usr/local/named -s /sbin/nologin bind

创建配置文件目录:

# mkdir -p /usr/local/named/etc

# chown bind:bind /usr/local/named/etc

# chmod 700 /usr/local/named/etc



二、named.conf的配置


创建主要的配置文件:

# vi /usr/local/named/etc/named.conf

===========================named.conf=======================

acl "trust-lan" { 127.0.0.1/8; 192.168.0.0/16;};

options {

directory "/usr/local/named/etc/";

pid-file "/var/run/named/named.pid";

version "0.0.0";

datasize 40M;

allow-transfer {

"trust-lan";};

recursion yes;

allow-notify {

"trust-lan";

};

allow-recursion {

"trust-lan";

};

auth-nxdomain no;

forwarders {

202.99.160.68;

202.99.168.8;};

};

logging {

channel warning

{ file "/var/log/named/dns_warnings" versions 3 size 1240k;

severity warning;

print-category yes;

print-severity yes;

print-time yes;

};

channel general_dns

{ file "/var/log/named/dns_logs" versions 3 size 1240k;

severity info;

print-category yes;

print-severity yes;

print-time yes;

};

category default { warning; };

category queries { general_dns; };

};

zone "." {

type hint;

file "named.root";

};

acl "CNC" {

58.16.0.0/16;

58.17.0.0/17;

58.17.128.0/17;

58.18.0.0/16;

58.19.0.0/16;

58.20.0.0/16;

58.21.0.0/16;

注:这些根据情况输入IP地址段

};

view "view_cnc" {

match-clients { CNC; };

zone "." {

type hint;

file "named.root";

};

zone "0.0.127.IN-ADDR.ARPA" {

type master;

file "localhost.rev";

};

include "master/cnc.def";

};

view "view_any" {

match-clients { any; };

zone "." {

type hint;

file "named.root";

};

zone "0.0.127.IN-ADDR.ARPA" {

type master;

file "localhost.rev";

};

include "master/telecom.def";

};

添加完成后,保存。



三、更新根区文件:


# cd /usr/local/named/etc/

# wget ftp://ftp.internic.org/domain/named.root

创建PID和日志文件:

# mkdir /var/run/named/

# chmod 777 /var/run/named/

# chown bind:bind /var/run/named/

# mkdir /var/log/named/

# touch /var/log/named/dns_warnings

# touch /var/log/named/dns_logs

# chown bind:bind /var/log/named/*

# mkdir master

# touch master/cnc.def

# touch master/telecom.def

生成rndc-key:

# cd /usr/local/named/etc/

# ../sbin/rndc-confgen > rndc.conf

把rndc.conf中:

# Use with the following in named.conf, adjusting the allow list as needed:

后面以的部分加到/usr/local/named/etc/named.conf中并去掉注释

运行测试:

# /usr/local/named/sbin/named -gc /usr/local/named/etc/named.conf &

状态检查:

# /usr/local/named/sbin/rndc status



四、建立启动脚本:


# vi /etc/init.d/named

============================== named.sh============================

#!/bin/bash

#

# named a network name service.

#

#

# chkconfig: 545 35 75

# description: a name server

#

if [ `id -u` -ne 0 ]

then

echo "ERROR:For bind to port 53,must run as root."

exit 1

fi

case "$1" in

start)

if [ -x /usr/local/named/sbin/named ]; then

/usr/local/named/sbin/named -u bind -c /usr/local/named/etc/named.conf && echo . && echo 'BIND9 server started.'

fi

;;

stop)

kill `cat /var/run/named/pid` && echo . && echo 'BIND9 server stopped.'

;;

restart)

echo .

echo "Restart BIND9 server"

$0 stop

sleep 10

$0 start

;;

*)

echo "$0 start | stop | restart"

;;

esac

===============================named.sh============================

# chmod 755 /etc/init.d/named

# chown root:root /etc/init.d/named

# chkconfig --add named

# chkconfig named on



五、添加一个NS


在域名的管理网站上,设定NS服务器为你安装的DNS



六、添加一个域名


# cd /usr/local/named/etc/master

# mkdir cnc

# mkdir telecom

# vi cnc.def

添加

zone "daoyou.com" {

type master;

file "master/cnc/daoyou.com";

};

# vi telecom.def

添加

zone "daoyou.com" {

type master;

file "master/telecom/daoyou.com";

};

添加网通的解析,解析到的IP为61.45.55.78

#vi cnc/daoyou.com

添加

$TTL 3600

$ORIGIN daoyou.com.

@ IN SOA ns.daoyou.com. root.ns.daoyou.com.(

2005121013 ;Serial

3600 ; Refresh ( seconds )

900 ; Retry ( seconds )

68400 ; Expire ( seconds )

15 );Minimum TTL for Zone ( seconds )

;

@ IN NS ns.daoyou.com.

@ IN A 61.45.55.78

www IN A 61.45.55.78

;

;end

添加电信的解析,解析到的IP为210.75.1.178

#vi telecom/daoyou.com

添加

$TTL 3600

$ORIGIN daoyou.com.

@ IN SOA ns.daoyou.com. root.ns.daoyou.com.(

2005121013 ;Serial

3600 ; Refresh ( seconds )

900 ; Retry ( seconds )

68400 ; Expire ( seconds )

15 );Minimum TTL for Zone ( seconds )

;

@ IN NS ns.daoyou.com.

@ IN A 210.75.1.178

www IN A 210.75.1.178

;

;end

#/usr/local/named/sbin/rndc reload

OK,到此你的DNS服务器就算是跑起来了。试一下分别用网通和电信的线路ping一下吧.


附:获取IP地址范围方法:
1、 利用shell程序获取IP地址段



#!/bin/sh

FILE=/root/study/apnic/ip_apnic

rm -f $FILE

wget http://ftp.apnic.net/apnic/stats/apnic/delegated-apnic-latest -O $FILE

grep 'apnic|CN|ipv4|' $FILE | cut -f 4,5 -d'|'|sed -e 's/|/ /g' | while read ip cnt

do

echo $ip:$cnt

mask=$(cat << EOF | bc | tail -1

pow=32;

define log2(x) {

if (x<=1) return (pow);

pow--;

return(log2(x/2));

}

log2($cnt)

EOF)

echo $ip/$mask>> cn.net

NETNAME=`whois $ip@whois.apnic.net | sed -e '/./{H;$!d;}' -e 'x;/netnum/!d' |grep ^netname | sed -e 's/.*: \(.*\)/\1/g' | sed -e 's/-.*//g'`

case $NETNAME in

CNC)

echo $ip/$mask >> CNCGROUP

;;

CHINANET|CNCGROUP)

echo $ip/$mask >> $NETNAME

;;

CHINANET|CNCGROUP)

echo $ip/$mask >> $NETNAME

;;

CHINATELECOM)

echo $ip/$mask >> CHINANET

;;

*)

echo $ip/$mask >> OTHER

;;

esac

done



2、 可以利用网上的资料,下面是最新的信息,然后利awk行成地址段即可。


wget http://218.66.103.230/vpn_route/cnc.new 新的网通路由表

wget http://218.66.103.230/vpn_route/chinanet.new 新的电信路由表
文章评论

共有 1 条评论

  1. leo_boy 于 2007-09-08 21:52:23发表:

    ?