内核：Fedora 9(2.6.25.6-55)
按照网上贴子安装的方法用 yum install kmod-nvidia安装驱动后，现在 无法进入X－windows.
输入#init 5出现的提示为：
Checking for module nvidia.ko ［OK］
Enabling the nvidia driver :Driver already enabled.
［OK］
starting irqbalance:
Fuse filesystem already available.
Fuse control filesysten already available. ［OK］
查看／etc/X11/xorg.conf文件为：
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "dri2"
Load "xtrap"
Load "glx"
Load "dbe"
Load "extmod"
EndSection
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV18 [GeForce4 MX 440 AGP 8x]"
Option "AddARGBGLXVisuals" "True"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
弄了两天还看不懂是那里出了问题，望指点。。
deepwhite 于 2008-06-15 19:18:05发表:
将：
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV18 [GeForce4 MX 440 AGP 8x]"
Option "AddARGBGLXVisuals" "True"
BusID "PCI:1:0:0"
EndSection
改成：
Section "Device"
Identifier "Card0"
Driver "nvidia"
EndSection
试试可不可以。
似乎即便到现在Fedora9的显卡驱动还是个问题。如果这样还是不行的话，我提供两个思路用来替换。
1、别再坚持使用这个驱动，直接使用系统自带的。可以将这个配置文件备份成另外一个名字，然后启动X-windows，这样会自动使用自带的驱动。或者你也可以使用setup命令来手动配置。
2、如果坚持想要使用官方驱动，可以考虑将Xorg降级到Fedora 8 的Xorg，这样做完全没有问题的。可以参考这里：http://www.linuxdiyf.com/bbs/viewthread.php?tid=93518&extra=page%3D9%26amp%3Bfilter%3D0%26amp%3Borderby%3Ddateline%26amp%3Bascdesc%3DDESC
这个写的简单一些，但正好适合你的。
或者这里：
http://www.linuxdiyf.com/bbs/viewthread.php?tid=93513&extra=page%3D9%26amp%3Bfilter%3D0%26amp%3Borderby%3Ddateline%26amp%3Bascdesc%3DDESC
针对ATI显卡的，但是解释的详细一些，看看应该会有收获。
PS：我的机器是ATI的驱动，开始时候就是因为Xorg和显卡兼容性不太好，得到的提示和LZ是一样的，后来降级到F8的Xorg就好了。只是降级Xorg，对系统没有什么影响，可以放心。
CX0774 于 2008-06-15 18:04:54发表:
运行startx后显示信息为：
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 15 17:48:33 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(EE)No devices detected
Fatal server error:
no sereens found
giving up
Xinit:Connection refused (errno 111):unable to connect to X server
Xinit:No sush process (errno 3):server error
deepwhite 于 2008-06-15 17:20:26发表:
检察/var/log/Xorg.log的出错信息
或者命令行输入startx来启动窗口，同时观察出错信息。那些信息很重要。