按照手册,我分别对zImage,ramdisk.image.gz等文件系统进行了烧写,但是当我烧写完重启板子的时候出现了以下信息:
PPCBoot 2.0.0 (Dec 15 2005 - 20:00:18)
PPCBoot code: 33F00000 -> 33F15D5C BSS: -> 33F191F0
DRAM Configuration:
Bank #0: 30000000 64 MB
Flash Memory Start 0x0
Device ID of the Flash is 18
intel E28F128J3A150 init finished!!!
Flash: 16 MB
Write 18 to Watchdog and it is ff now
start linux now(y/n):## Booting image at 30008000 ...
copy kernel done
copy ramdisk done
Setup linux parameters at 0x30000100
cpu_arm920_cache_clean_invalidate_all finished
before call_linux
并一直重复.我看有类似的帖子,说可能是内核文件烧写出了问题,于是我重新烧写了zImage文件,信息如下:
SMDK2410 # tftp 30008000 zImage
NetOurIP =c0a802de
NetServerIP = c0a8027a
NetOurGatewayIP = c0a80201
NetOurSubnetMask = ffffff00
ARP broadcast 1
ARP broadcast 2
TFTP from server 192.168.2.122; our IP address is 192.168.2.222
Filename 'zImage'.
Load address: 0x30008000
Loading: #################################################################
#################################################################
##############################################
done
Bytes transferred = 898952 (db788 hex)
然后重启板子,还是出现原来的情况,请各位帮忙看看是什么问题?谢谢了!
补充:我用的zImage文件是板子原HHARM2410-R3/image中的,文件本身应该不会出错吧!
zhengfish 于 2008-03-28 16:23:38发表:
PPCBoot 2.0.0 (Nov 4 2007 - 15:27:05)
I/O: 8000300, VID: 90000a46
PPCBoot code: 33F00000 -> 33F15CB0 BSS: -> 33F19004
DRAM Configuration:
Bank #0: 30000000 32 MB
Flash Memory Start 0x0
Device ID of the Flash is 18
intel TE28F640J3C120 init finished!!!
Flash: 8 MB
Hit any key to stop autoboot: 0
start linux now(y/n):
SMDK2410 # tftp 30008000 zImage
NetOurIP =c0a8050b
NetServerIP = c0a80503
NetOurGatewayIP = c0a802fe
NetOurSubnetMask = ffffff00
ARP broadcast 1
ARP broadcast 2
TFTP from server 192.168.5.3; our IP address is 192.168.5.11
Filename 'zImage'.
Load address: 0x30008000
Loading: #################################################################
#################################################################
###########################################################
done
Bytes transferred = 964260 (eb6a4 hex)
SMDK2410 # bootm 30008000
## Booting image at 30008000 ...
copy kernel done
copy ramdisk done
Setup linux parameters at 0x30000100
cpu_arm920_cache_clean_invalidate_all finished
before call_linux
zhengfish 于 2008-03-28 16:22:29发表:
您好，我也碰到一摸一样的问题，不知道怎么弄，能分享一下吗？
我是HHARM2410-Study-R1的板子，OS下载的是ELDK-4.1 for ARM，编出来的zImage下载之后就是不能启动，，，，
谢谢先。
huzhiwenhuhu 于 2008-03-12 13:44:25发表:
问题已经解决，多谢大家的关注！
huzhiwenhuhu 于 2008-03-10 15:49:40发表:
自己顶下
huzhiwenhuhu 于 2008-03-08 21:15:35发表:
请大家帮我看看，不胜感激！