fedora 8 上安装VMware-workstation-6.0.2-59824.i386成功

终于安装成功了，以前FC6的时候一直没成功过，这次很顺利，甚至都没有遇到网上说的要先安装gcc的问题

[root@localhost ~]# cd /home
[root@localhost home]# cd vm*
[root@localhost vmware-distrib]# dir
bin etc installer man system_etc vmware-install.pl
doc FILES lib sbin usr vmware-vix

[root@localhost vmware-distrib]# rpm -q kernel-devel
kernel-devel-2.6.23.1-42.fc8
kernel-devel-2.6.23.15-137.fc8
[root@localhost vmware-distrib]# uname -r
2.6.23.15-137.fc8

检查是否匹配，否则先升级

[root@localhost vmware-distrib]# ./vmware-install.pl
A previous installation of VMware Workstation has been detected.

The previous installation was made by the tar installer (version 4).

Keeping the tar4 installer database format.

Uninstalling the tar installation of VMware Workstation.

Stopping VMware services:
Virtual machine monitor [确定]

The removal of VMware Workstation 6.0.2 build-59824 for Linux completed
successfully. Thank you for having tried this software.

Installing VMware Workstation.

In which directory do you want to install the binary files?
[/usr/bin]

What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]

What is the directory that contains the init scripts?
[/etc/rc.d/init.d]

In which directory do you want to install the daemon files?
[/usr/sbin]

In which directory do you want to install the library files?
[/usr/lib/vmware]

The path "/usr/lib/vmware" does not exist currently. This program is going to
create it, including needed parent directories. Is this what you want?
[yes]

In which directory do you want to install the manual files?
[/usr/share/man]

In which directory do you want to install the documentation files?
[/usr/share/doc/vmware]

The path "/usr/share/doc/vmware" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]

The installation of VMware Workstation 6.0.2 build-59824 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall.pl".

Before running VMware Workstation for the first time, you need to configure it
by invoking the following command: "/usr/bin/vmware-config.pl". Do you want
this program to invoke the command for you now? [yes]

Making sure services for VMware Workstation are stopped.

Stopping VMware services:
Virtual machine monitor [确定]

Configuring fallback GTK+ 2.4 libraries.

In which directory do you want to install the theme icons?
[/usr/share/icons]

What directory contains your desktop menu entry files? These files have a
.desktop file extension. [/usr/share/applications]

In which directory do you want to install the application's icon?
[/usr/share/pixmaps]

Trying to find a suitable vmmon module for your running kernel.

None of the pre-built vmmon modules for VMware Workstation is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.23.15-137.fc8/build/include]

Extracting the sources of the vmmon module.

Building the vmmon module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmmon-only'
make -C /lib/modules/2.6.23.15-137.fc8/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.23.15-137.fc8-i686'
CC [M] /tmp/vmware-config0/vmmon-only/linux/driver.o
CC [M] /tmp/vmware-config0/vmmon-only/linux/hostif.o
CC [M] /tmp/vmware-config0/vmmon-only/common/comport.o
CC [M] /tmp/vmware-config0/vmmon-only/common/cpuid.o
CC [M] /tmp/vmware-config0/vmmon-only/common/hash.o
CC [M] /tmp/vmware-config0/vmmon-only/common/memtrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/phystrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/task.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciContext.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciDatagram.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciDriver.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciDs.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciGroup.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciHashtable.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciProcess.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciResource.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciSharedMem.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmx86.o
CC [M] /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmmon-only/vmmon.mod.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.23.15-137.fc8-i686'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
The module loads perfectly in the running kernel.

Trying to find a suitable vmblock module for your running kernel.

None of the pre-built vmblock modules for VMware Workstation is suitable for
your running kernel. Do you want this program to try to build the vmblock
module for your system (you need to have a C compiler installed on your
system)? [yes]

Extracting the sources of the vmblock module.

Building the vmblock module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmblock-only'
make -C /lib/modules/2.6.23.15-137.fc8/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.23.15-137.fc8-i686'
CC [M] /tmp/vmware-config0/vmblock-only/linux/block.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/control.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/dentry.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/file.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/filesystem.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/inode.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/module.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/stubs.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/super.o
LD [M] /tmp/vmware-config0/vmblock-only/vmblock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmblock-only/vmblock.mod.o
LD [M] /tmp/vmware-config0/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.23.15-137.fc8-i686'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/vmware-config0/vmblock-only'
The module loads perfectly in the running kernel.

Do you want networking for your virtual machines? (yes/no/help) [yes]

Configuring a bridged network for vmnet0.

The following bridged networks have been defined:

. vmnet0 is bridged to eth0

All your ethernet interfaces are already bridged.

Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]

Configuring a NAT network for vmnet8.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

Probing for an unused private subnet (this can take some time)...

The subnet 172.16.62.0/255.255.255.0 appears to be unused.

The following NAT networks have been defined:

. vmnet8 is a NAT network on private subnet 172.16.62.0.

Do you wish to configure another NAT network? (yes/no) [no]

Do you want to be able to use host-only networking in your virtual machines?
[yes]

Configuring a host-only network for vmnet1.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

Probing for an unused private subnet (this can take some time)...

The subnet 192.168.28.0/255.255.255.0 appears to be unused.

The following host-only networks have been defined:

. vmnet1 is a host-only network on private subnet 192.168.28.0.

Do you wish to configure another host-only network? (yes/no) [no]

Trying to find a suitable vmnet module for your running kernel.

None of the pre-built vmnet modules for VMware Workstation is suitable for your
running kernel. Do you want this program to try to build the vmnet module for
your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmnet module.

Building the vmnet module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmnet-only'
make -C /lib/modules/2.6.23.15-137.fc8/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.23.15-137.fc8-i686'
CC [M] /tmp/vmware-config0/vmnet-only/driver.o
CC [M] /tmp/vmware-config0/vmnet-only/hub.o
CC [M] /tmp/vmware-config0/vmnet-only/userif.o
CC [M] /tmp/vmware-config0/vmnet-only/netif.o
CC [M] /tmp/vmware-config0/vmnet-only/bridge.o
CC [M] /tmp/vmware-config0/vmnet-only/filter.o
CC [M] /tmp/vmware-config0/vmnet-only/procfs.o
CC [M] /tmp/vmware-config0/vmnet-only/smac_compat.o
SHIPPED /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.23.15-137.fc8-i686'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/vmware-config0/vmnet-only'
The module loads perfectly in the running kernel.

Do you want to install the Eclipse Integrated Virtual Debugger? You must have
the Eclipse IDE installed. [no]

Creating a new VMware VIX API installer database using the tar4 format.

Installing VMware VIX API.

You must read and accept the VMware VIX API End User License Agreement to
continue.
Press enter to display it.


VMware(R) Software Developer Kit (SDK) Agreement

VMware, Inc. ("VMware") provides this Software Developer Kit ("SDK") for VIX
Application Programming Interface ("VIX API") to you subject to the
following terms and conditions. If you disagree with any of the following
terms, then do not use this SDK.

1. This SDK contains a variety of materials, including but not limited to,
interface definitions, documentation, Redistributable Code and Sample Code
regarding programming interfaces to one or more VMware products as
referenced in such materials ("VMware Software"). This SDK is intended to
serve as a guide for writing programs to interact with the VMware Software.
For the purpose of this Agreement, "Sample Code" means sample software in
source code format designated as "Sample Code" in the SDK documentation, and
"Redistributable Code" means object code files designated as
"Redistributable Code" in the SDK documentation.

2. Subject to the restrictions below, you may download and make a
reasonable number of copies of the SDK contents for your personal use solely
for the purpose of creating software that communicates with VMware Software
("Developer Software"). You agree to defend, indemnify and hold harmless
VMware, and any of its directors, officers, employees, affiliates or agents,

Do you accept? (yes/no) yes

Thank you.

In which directory do you want to install the VMware VIX API binary files?
[/usr/bin]

In which directory do you want to install the VMware VIX API library files?
[/usr/lib/vmware-vix/lib]

The path "/usr/lib/vmware-vix/lib" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]

In which directory do you want to install the VMware VIX API document pages?
[/usr/share/doc/vmware-vix]

The path "/usr/share/doc/vmware-vix" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]

The installation of VMware VIX API 1.1.2 build-59824 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-vix.pl".

Starting VMware services:
Virtual machine monitor [确定]
Blocking file system: [确定]
Virtual ethernet [确定]
Bridged networking on /dev/vmnet0 [确定]
Host network detection [确定]
Host-only networking on /dev/vmnet1 (background) [确定]
DHCP server on /dev/vmnet1 [确定]
Host-only networking on /dev/vmnet8 (background) [确定]
DHCP server on /dev/vmnet8 [确定]
NAT service on /dev/vmnet8 [确定]

The configuration of VMware Workstation 6.0.2 build-59824 for Linux for this
running kernel completed successfully.

You can now run VMware Workstation by invoking the following command:
"/usr/bin/vmware".

Enjoy,

--the VMware team

[root@localhost vmware-distrib]#


VMware Workstation 6.0.2 Build 59824 for Linux 序列号

1TMYT-T0L2X-J24FU-4MDZK
M15YR-429DA-YAH6F-4WRX7
N1HPX-6U248-D206Y-4Y8Z6
YHE88-5KCDW-C84DF-4YDQ6