. Move the base driver tar file to the directory of your choice. For example,
use /home/username/atl2 or /usr/local/src/atl2.
2. Untar/unzip archive:
tar zxf atl2-x.x.x.tar.gz
3. Change to the driver src directory:
cd atl2-x.x.x/src/
4. Compile the driver module:
make install
The binary will be installed as:
/lib/modules//kernel/drivers/net/atl2.[k]o
The install locations listed above are the default locations. They might
not be correct for certain Linux distributions. For more information,
see the ldistrib.txt file included in the driver tar.
5. Install the module:
insmod atl2 =
6. Assign an IP address to the interface by entering the following, where
x is the interface number:
ifconfig ethx
7. Verify that the interface works. Enter the following, where is the IP address for another machine on the same subnet as the interface
that is being tested:
enjoy545352 于 2012-01-12 13:56:10发表:
踩踩，受教了~~~
luodeke 于 2012-01-01 22:58:07发表:
fdfsdfdsf
yj_cherry7 于 2009-09-23 15:18:19发表:
学习了 呵呵呵
dongfangyi2007 于 2009-09-16 09:43:38发表:
linux系统里怎么弄他的驱动？
daiwenxiamen 于 2009-07-22 13:24:37发表:
我也要那个型号的驱动 我的是openSolaris
dcyflying 于 2009-05-04 18:44:13发表:
我的问题也是这样的 可不知道怎么搞野
seeking_su 于 2009-04-28 13:17:01发表:
. Move the base driver tar file to the directory of your choice. For example,
/kernel/drivers/net/atl2.[k]o
=
use /home/username/atl2 or /usr/local/src/atl2.
2. Untar/unzip archive:
tar zxf atl2-x.x.x.tar.gz
3. Change to the driver src directory:
cd atl2-x.x.x/src/
4. Compile the driver module:
make install
The binary will be installed as:
/lib/modules/
The install locations listed above are the default locations. They might
not be correct for certain Linux distributions. For more information,
see the ldistrib.txt file included in the driver tar.
5. Install the module:
insmod atl2
6. Assign an IP address to the interface by entering the following, where
x is the interface number:
ifconfig ethx
7. Verify that the interface works. Enter the following, where
is the IP address for another machine on the same subnet as the interface
that is being tested:
ping
hantu 于 2009-04-17 00:12:16发表:
先安装内核源代码,然后就可以编译你的网卡驱动了
391129243 于 2009-04-16 17:17:47发表:
好大问题啊
flynn 于 2009-04-14 15:43:43发表:
我为什么不能下附件啊
nickzhu_7 于 2009-01-22 12:35:36发表:
谢谢，我也想要
jsjzzs 于 2008-11-08 23:19:13发表:
fsdfsdfsdf
南望居士 于 2008-10-14 11:05:19发表:
我也需要呢！
coll 于 2008-09-20 01:16:39发表:
哈哈
谢谢你啦
正需要呢
baifan1985 于 2008-07-16 21:58:44发表:
hehe我非常需要这种网卡 谢谢
wo3322400 于 2008-06-14 14:24:07发表:
same
yanjibao 于 2008-04-26 18:53:11发表:
fedora7时还能编译，fedora8就编译不了了。从国外找的最新驱动，同样用不了。fedora8要是再加强一下驱动支持，就太好了。界面比ubuntu漂亮，我觉得。但是，驱动，驱动啊！！！
yanjibao 于 2008-04-26 18:51:56发表:
用ubuntu吧，attansic l2能自动识别。fedora嘛，用不了
阿尔拔 于 2008-02-19 00:02:51发表:
怎么没人帮忙啊暗暗，
谁能帮我编译下AttansicL2显卡驱动啊，我的搞了半天kernel source 装不了没法编译。
或者给我说下kernel source 哪里下载啊
阿尔拔 于 2008-02-18 07:53:47发表:
我按它里面的说明编译又会出现这个错误,如下：
“Makefile:101: *** Linux kernel source not configured - missing config.h。 停止”
然后我在网上查了下有人说要装Kernlusource于是我去华军：“http://www.onlinedown.net/soft/26192.htm”这里下了一个“Linux Kernel 2.6.24.2”
可是我不知要如何安装，下载下来的是linux-2.6.24.2.tar.bz2格式的。
我查了我的fedora 8 它的内核版本是:2.6.23.1-42.fc8
为什么我的系统上也有Kernel怎么会装不了呢