1、在FC4(fedora core 4)装cadence5033没问题，就是在.sh的安装文件里的tar命令参数有问题，有一个参数不认，可能是FC4里的tar版本有点新了。不过把有问题的参数删掉还是能装，装好也能用。
2、FC4装cadence6.1也可以，而且很顺利，中间没有什么问题，就是最后要装一个oa。由此看来FC4与Cadence6.1最搭配。selinux要关掉，否则运行installscape时会出现“cannot restore segment prot after reloc: Permission denied”的错误。
3、但是在FC7上装cadence6.1就有问题了，开始是uncommpress命令没找到，再后来启动installscape时提示找不到libXP.so.6这个库，不过这两个都可以从网上找到安装包(www.rpmfind.com)，下载下来装上就解决了。(开始还以为是由于装系统时没有全部安装导致一些库缺失，可后来将系统全部安装－－语言包只装了英语和汉语，还是找不到那个库，看来是FC7本身没这个库)
最要命的是装好以后运行icfb，出现错误，Xwindows 错误，一大堆。X Error: BadPixmap (invalid Pixmap parameter）网上有人说FC6的Xwindows改变很大："FC6 uses xorg 7.x, which is so-called modular X, and the paths for X window files are changed totally. Sometimes one has to figure out where and what are missing to make the EDA tools back to normal. "可能就是这个原因吧。
lishyg 于 2009-07-12 14:52:20发表:
[i=s] 本帖最后由 lishyg 于 2009-7-12 15:07 编辑 [/i]
我用的是openSUSE11.1，装好后，运行icbf&,情况和最后的差不多，出现错误，Xwindows 错误，一大堆。X Error:不过是\e Display:0.0 error " Badwindow (invalid Pixmap parameter)"
\e Request 18 error 3 serial 1734
等等，很多行类似如此，
Resource id: 0x3600011
Qt Warning: X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19 (X_DeleteProperty)
Resource id: 0x3600011
Qt Warning: X Error: BadWindow (invalid Window parameter) 3
Major opcode: 18 (X_ChangeProperty)
Resource id: 0x3600011
Qt Warning: X Error: BadWindow (invalid Window parameter) 3
Major opcode: 18 (X_ChangeProperty)
Resource id: 0x3600011
Qt Warning: X Error: BadWindow (invalid Window parameter) 3
Major opcode: 18 (X_ChangeProperty)
Resource id: 0x3600011
最后，还有
libxcb: WARNING! Program tries to lock an already locked connection,
which indicates a programming error.
There will be no further warnings about this issue.
libxcb: WARNING! Program tries to unlock a connection without having acquired
a lock first, which indicates a programming error.
There will be no further warnings about this issue.
哪位高手指点一下！！谢谢！！
wanglixu2005 于 2009-03-20 19:23:24发表:
谢谢了，现在在装CADENCE