利用mkCDrec 备份系统时的终端显示

发布时间:2007-11-14 22:23:07来源:红联作者:caixicheng

0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0
only 0 bytes read at relative offset 0

上面的信息是正常的马？

文章评论

共有 5 条评论

caixicheng 于 2007-11-15 11:32:21发表:

我备份完后用那ISO文件进去，是DVD的
能出现那个启动画面。但是到了下面这个提示后，就停住了
RAMDISK: Compressed image found at block 0
No filesystem could mount root, tried:iso9660
Kernel panic - not syscing: VFS: Unable to mount root fs on unknown-block(2,0)
caixicheng 于 2007-11-15 10:56:25发表:

THANK YOU！
marco.chan 于 2007-11-15 09:20:19发表:

http://mkcdrec.ota.be/
正在官网中查找讯息。。。。
0:w(5(
caixicheng 于 2007-11-15 08:43:54发表:

我之前有MAKE TEST了
刚开始说头文件没装，还有那个第20项
我都搞了。。。有点不解，那个教程有点简单啊，有没具体点的？
marco.chan 于 2007-11-14 22:43:42发表:

你在备份之前，先用 mkcdrec test检查一下，看有没有需要修改配置的～

利用mkCDrec 备份系统时的终端显示

共有 5 条评论

频道文章

最新教程

随机推荐