VIA/S3G UniChrome Pro IGP显卡驱动总结的另一个好文章
最近安装了OpenSuse系统，也是在安装驱动的时候出现问题。本来拿到了openchrome的源码，可是不知道为什么老是?少一个lib,没有办法，只能到网上再找，可是找了不久，就看到一个网页上介绍这个
http://www.openchrome.org/上有。去下一个相应版本的。
Ark Linux :
Ark Linux includes and uses OpenChrome by default. There is no need to install external packages.
Fedora Core :
http://washington.kelkoo.net/epia
Debian/Ubuntu :
http://www.csd.uwo.ca/~mfgalizi/debian
Ubuntu :
http://www.openchrome.org/snapshots/ubuntu
http://gamesplace.info/opensource/openchrome/dapper-binaries/ (Dapper)
Mandriva 2006.0 :
http://www.mde.djura.org/index2006.0.html
Mandriva 2006.0 64bit :
http://www.mde.djura.org/index2006.0_64.html
PCLinuxOS 2005:
http://www.mde.djura.org/indexpclo2005.html
Slackware :
xorg-6.9 is in Slackware-current as of 14 January 2006. It is the first released version of xorg which provide support for (some) unichrome chipsets.
SUSE and OpenSUSE:
http://www.logix.cz/michal/devel/suse-openchrome - RPMS for OpenSUSE 10.1, 10.2 and 10.3, both i386 and x86-64
CentOS 4/Red Hat Enterprise Linux 4:
http://www.yuiop.co.uk/epia/rhel4 - these are built from the same SRPMs as the Fedora Core ones provided above by xavier, but not updated as often; built on CentOS 4
看样子是不少，估计能满足大部分的系统了。我看上一个文章的点击率很不错，所以再写出来，让那些刚刚入门的弟兄们不那么辛苦的找了。如果想自己编译的话也可以参看上一文章来下载源码自己编译
http://hi.baidu.com/iceliushuai/blog/item/e68011d5b8a504c550da4b25.html
不过在安装或者是编译好源码后一定要修改下/etc/X11/xorg.conf文件，来设置，然后ctrl+alt+backspace来重启桌面一次来使设置生效。
xorg.conf文件的修改示例：
找到
Section "Device"
BoardName "Framebuffer Graphics"
BusID "1:0:0"
# Driver "fbdev"
Driver "via"
Identifier "Device[0]"
VendorName "VESA"
EndSection
注释掉原来
# Driver "fbdev"或是# Driver "vesa"
改成
Driver "via"
重启桌面后可能分辨率会很大，那么改成
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480" "default"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480" "default"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480" "default"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480" "default"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
然后就没有问题了。享受不闪的Linux吧。
suwdxd 于 2009-04-30 22:21:35发表:
辛苦了。