首先查看分区信息
fdisk# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 9729 78043770 8e Linux LVM
Disk /dev/sdb: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 1275 10241406 7 HPFS/NTFS
/dev/sdb2 1276 9963 69786360 f W95 Ext'd (LBA)
/dev/sdb5 1276 5099 30716248+ b W95 FAT32
/dev/sdb6 5100 8923 30716248+ b W95 FAT32
/dev/sdb7 8924 9963 8353768+ b W95 FAT32
在/mnt下面添加winD目录之后使用mount命令
# mount -t vfat -o rw /dev/sdb5 /mnt/winD
系统返回mount: /dev/sdb5 is not a valid block device
请问是什么原因啊？？本人刚刚接触linux,系统核心是 2.6.18-1.2798.fc6xen #1 SMP Mon Oct 16 14:59:01 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
Subbo 于 2007-05-04 11:08:18发表:
磁盘阵列。
trumpeter 于 2007-05-03 22:57:44发表:
You seem to have a SoftRAID/FakeRAID hardware and must use an activated,
different device under /dev/mapper, (e.g. /dev/mapper/nvidia_eahaabcc1)
后来我用安装盘启动看了看我的分区表 发觉原来的/dev/sdb应该是 /dev/nvidia_ffjcbdgcp
然后回到系统再mount ok
请问高手 为什么fdisk会显示不出来呢？
[ 本帖最后由 trumpeter 于 2007-5-3 23:00 编辑 ]
karon_fedora 于 2007-05-02 23:40:48发表:
modprobe ide-scsi 的提示是什么？
如果是失败的话
换
modprobe scsi_mod 试试
再不行的话把
lsmod贴出来看看
[ 本帖最后由 karon_fedora 于 2007-5-2 23:47 编辑 ]
trumpeter 于 2007-05-02 23:06:47发表:
还是不行:49ab:1
karon_fedora 于 2007-05-02 21:29:10发表:
模块灭有被加载
modprobe ide-scsi
然后再mount