安装了个无线网卡,驱动加载成功，系统启动之后，使用iwconfig查看，出现如下信息：[font=Verdana]
[/font] eth1 IEEE 802.11b ESSID:"wlan" Nickname:"HERMES I"[font=Verdana]
[/font] Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated[font=Verdana]
[/font] Bit Rate:11 Mb/s Sensitivity:1/3[font=Verdana]
[/font] Retry limit:4 RTS thr:off Fragment thr:off[font=Verdana]
[/font] Encryption key:off[font=Verdana]
[/font] Power Management:off[font=Verdana]
[/font] Link Quality=0/92 Signal level=134/153 Noise level=134/153[font=Verdana]
[/font] Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0[font=Verdana]
[/font] Tx excessive retries:0 Invalid misc:0 Missed beacon:0[font=Verdana]
[/font]使用iwlist查看，出现如下信息：[font=Verdana]
[/font]eth1 Interface doesn't support scanning : Network is down[font=Verdana]
[/font]请问[font=Verdana]
[/font]（1）这个是否意味着无线网卡的驱动加载成功了呢？[font=Verdana]
[/font]（2）其中的”Access Point: Not-Associated“，”eth1 Interface doesn't support scanning : Network is down“[font=Verdana]
[/font]是什么意思？[font=Verdana] [/font]
无线网卡配套的光盘里面有linux的驱动，这个驱动是不是只适用与x86架构的.还有其他构架区别吗
