我用的是镜像文件从硬盘安装Linux
用Wingrub引导之后出现了下面的一段:
Total of 1 processors activated (3620.19 Bogo MIPS)
ENABLING IO-APIC IRQs
..TIMER:Vector=0*31 apic1=0 pin=0 apic2=-1 pin=-1
..MP-BIOS bug:8254 timer not connected to IO-APIC
...trying to set timer(IRQ0) through the 8259A...failed
...trying to set timer as Virtual Wire IRQ...failed
...trying to set timer as ExtINT IRQ...failed :(
Kernel panic-not syncing:IO-APIC+timer doesn't work!
Boot with apic=debug and send a report.Then try booting with the 'noapic' option.
然后就不动了
多谢指点指点阿


218.85.121.* 于 2007-05-04 13:01:01发表:
光盘启动后
按F4到kernel,输入linux noapic
搞定