FC6启动故障
发布时间:2007-02-27 08:00:04来源:红联作者:sbaiyn
我装了FC6之后，在启动到start udev的过程中经常会在出现如下信息后停止，我真的不明白是什么原因，请大家一定要帮忙，在线急等！谢谢各位了！
BUG: warning: (in_irq() && !(warned++)) at drivers/ieee1394/ohci1394.c:233/get_phy_reg() (Not tainted)
[] dump_trace+0x69/0x1b6
[] show_trace_log_lvl+0x18/0x2c
[] show_trace+0xf/0x11
[] dump_stack+0x15/0x17
[] get_phy_reg+0x90/0x10d [ohci1394]
[] ohci_irq_handler+0x5e1/0x782 [ohci1394]
[] handle_IRQ_event+0x1a/0x3f
[] handle_level_irq+0x96/0xe2
[] do_IRQ+0xc5/0x103
=======================
BUG: warning: (in_irq() && !(warned++)) at drivers/ieee1394/ohci1394.c:262/set_phy_reg() (Not tainted)
[] dump_trace+0x69/0x1b6
[] show_trace_log_lvl+0x18/0x2c
[] show_trace+0xf/0x11
[] dump_stack+0x15/0x17
[] set_phy_reg+0x9f/0xfe [ohci1394]
[] ohci_irq_handler+0x5f3/0x782 [ohci1394]
[] handle_IRQ_event+0x1a/0x3f
[] handle_level_irq+0x96/0xe2
[] do_IRQ+0xc5/0x103
=======================
Subbo 于 2007-02-27 11:30:47发表:
不懂，确实不懂。
sbaiyn 于 2007-02-27 09:34:49发表:
怎么没人帮忙啊！