关于redhat 9 安装的问题.

安装RedHat Linux 9时，出现了下面的错误。
共有3个分区，C D E 硬盘在IDE2主接口，光驱在从接口。
剩下10G未分区，是从光驱安装，每次安装都这样错误。
安装不是有个Boot:：_ 的启动么? 回安装，就这样：
loop:loaded(max 8 devices )
Uniform Multi-Platfrom E-IDE driver Revision :7.0 beta-2.4
ide:Assuming 33MHz system bus speed for PIO modes;overrde with idebus=xx
hdc:Maxtor 4R120LO,ATA DISK drive
hdd:SAMSUNG DVD-ROM SD-616E,ATAPI CD/DVD-ROM drive
ide1 at 0x170,0x177,ox376 onirq 15
hdc:host protected area=>1
hdc:230307841 sectors (117918MB)w/2048KiB Cache,CHS=228480/16/63
HDD:atapi 48*DVD=ROM drive,512kb Cache
Unifrom CD-ROM driver 0.99.newide
Partion check:
hdc:[PTBL] [14336/255/63] hdc1 hdc2
ide-floppy driver 0.99.newide
usb.c:registered new driver usbevfs
usb.c:registered new driver hub
ehci-hcd 00:1d.7:PCI driver 8086:265 c
ehci-hcd 00:1d.7:irq 11,pcimeme00dc00
usb.c:new usb bus registered,assigned bus number1
ehci-hcd 00 :1d.7:enabled 64bit PCIDMA
PCI :00:001d.7 PCI cache line size set incorrtly (0 bytes) by BIOS/FW
PCI :00.1d.7.7:usb 2.0 enabled,EHCI 1.0,driver 2003-jan-22
到底是怎么回事呢？请高手赐教。