还是网卡驱动模块不能自动加载问题?

[i=s] 本帖最后由 不学不放心 于 2011-4-4 22:20 编辑 [/i]

之前安装了DFE－530TX网卡，后发现网卡硬件有问题，于是换了一块8139的网卡，安装好驱动，但是就是不能在启动系统时自动加载，登录后手动加载驱动模块没有问题，搜索了很多贴子，更改配置的方法试了，未成功，希望高手指点一下，ifconfig命令的结果(好像不能上传图片）：
[font=Arial]eth0 Link encap:Ethernet HWaddr 00:E0:4C:C1:EB:B5
inet6 addr: fe80::2e0:4cff:fec1:ebb5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4375 errors:0 dropped:0 overruns:0 frame:0
TX packets:4974 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2447636 (2.3 MiB) TX bytes:873615 (853.1 KiB)
Interrupt:169 Base address:0x2f00
eth0:0 Link encap:Ethernet HWaddr 00:E0:4C:C1:EB:B5
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:169 Base address:0x2f00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2221 errors:0 dropped:0 overruns:0 frame:0
TX packets:2221 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:172870 (168.8 KiB) TX bytes:172870 (168.8 KiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:120.2.185.161 P-t-P:120.2.176.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:3739 errors:0 dropped:0 overruns:0 frame:0
TX packets:4306 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:2327158 (2.2 MiB) TX bytes:734753 (717.5 KiB)[/font]
我安装了ADSL拨号，只有一块网卡，现在有eth0和eth0:0,是不是跟这个有关系，我新装 的8139网卡不在原来网卡的位置！