（申精）服务器服务检测脚本

[i=s] 本帖最后由 傻东 于 2011-2-10 19:39 编辑 [/i]

访问我的博客http://sillydong.com看更多我的原创文章

由于最近一直在弄服务器，所以一直没有带来Arch Linux的东西，这篇文章给出的脚本依旧是为服务器准备的。写shell多了，C都快忘了怎么写了，这样不好啊……

公司的服务器经常莫名其妙就挂，ssh上去又是好的，看看进程发现服务根本没打开，为什么呢？服务器被重启了！我的前任留下一个check.sh脚本，用来监测apache等进程，脚本在监测到进程过多时就重启服务器，结果有些服务器没有设置好开机启动那些apache之类的，就悲剧了。我就重新写了一个脚本，代替了crontab中原来的check.sh，在进程过多时不是重启服务器而是重启服务，这下服务器正常多了，网站那边负责的朝我喊“XXXX网站挂了，什么问题？”少了，哈哈。

废话多了点，脚本如下，使用前请一定看清代码并且修改其中一些路径之类的东西，以确保不会在你的服务器上造成什么不必要的伤害。[code]#!/bin/bash
# service --> name to test
# apache --> apache|apache2|http|httpd
# nginx --> nginx
# mysql --> mysql|mysqld
# php-cgi --> php-cgi
# vsftpd --> vsftp|vsftpd
# pure-ftpd --> pure-ftp|pure-ftpd
# apache-tomcat --> java
# nrpe --> nrpe
# Set the service name you want to test and its max number of processes first.
# Don't forget to check the bin path for each service.
# By Chen.Zhidong
# http://sillydong.com

PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
export PATH

SERVICE="httpd mysqld vsftpd nrpe"
SERVICE_MAX=(70 5 5 1)

LOGPATH="/root"
APACHE_PATH="/usr/local/apache2"
NGINX_PATH="/usr/local/nginx"
PHP_PATH="/usr/local/php"
TOMCAT_PATH="/usr/local/apache-tomcat-6.0.26"
PURE_PATH="/usr/local/pureftpd"
NRPE_PATH="/usr/local/nagios"
i=0

if [ -e $LOGPATH/restart.log ]
then
tail -n 40 $LOGPATH/restart.log > $LOGPATH/restart.tmp
rm -rf $LOGPATH/restart.log
mv $LOGPATH/restart.tmp $LOGPATH/restart.log
fi

for serv in $SERVICE
do
counter=0
counter=`ps -A | grep "$serv" | wc -l`

if [ $counter -eq 0 ];then
echo "$serv is off at $(date), starting..." >> $LOGPATH/restart.log
case $serv in
apache*|http*)
#echo "apache start"
$APACHE_PATH/bin/apachectl restart >> $LOGPATH/restart.log
;;
nginx)
#echo "nginx start"
$NGINX_PATH/sbin/nginx -s reopen >> $LOGPATH/restart.log
;;
mysql*)
#echo "mysql start"
#按照一般情况，在搭建服务器时就应该按照统一标准，此处可以按照实际情况修改一下
if [ -e /etc/init.d/mysqld ];then
/etc/init.d/mysqld restart >> $LOGPATH/restart.log
else
/etc/init.d/mysql restart >> $LOGPATH/restart.log
fi
;;
php-cgi)
#echo "php-cgi start"
$PHP_PATH/sbin/php-fpm restart >> $LOGPATH/restart.log
;;
vsftp*)
#echo "vsftpd start"
/etc/init.d/vsftpd restart >> $LOGPATH/restart.log
;;
pure-ftp*)
#echo "pureftpd start"
$PURE_PATH/sbin/pure-ftpd -B >> $LOGPATH/restart.log
;;
java*) #apache-tomcat
#echo "tomcat start"
$TOMCAT_PATH/bin/startup.sh >> $LOGPATH/restart.log
;;
nrpe)
#echo "nrpe start"
$NRPE/bin/nrpe -c $NRPE/etc/nrpe.cfg
;;
*)
echo "Wrong service name while starting..." >> $LOGPATH/restart.log
;;
esac
else
echo "$serv is on at $(date), next service..." >> $LOGPATH/restart.log
fi

if [ $counter -gt ${SERVICE_MAX[i]} ];then
echo "$(date), too many $serv, needs to restart..." >> $LOGPATH/restart.log
case $serv in
apache*|http*)
#echo "apache restart"
$APACHE_PATH/bin/apachectl restart >> $LOGPATH/restart.log
;;
nginx)
#echo "nginx restart"
$NGINX_PATH/sbin/nginx -s reload >> $LOGPATH/restart.log
;;
mysql*)
#echo "mysql restart"
if [ -e /etc/init.d/mysqld ];
then
/etc/init.d/mysqld restart >> $LOGPATH/restart.log
else
/etc/init.d/mysql restart >> $LOGPATH/restart.log
fi
;;
php-cgi)
#echo "php-cgi restart"
$PHP_PATH/sbin/php-fpm restart >> $LOGPATH/restart.log
;;
vsftp*)
#echo "vsftpd restart"
/etc/init.d/vsftp* restart >> $LOGPATH/restart.log
;;
pure-ftp*)
#echo "pureftpd restart"
$PURE_PATH/sbin/pure-ftpd -B >> $LOGPATH/restart.log
;;
java*) #apache-tomcat
#echo "tomcat restart"
$TOMCAT_PATH/bin/startup.sh >> $LOGPATH/restart.log
;;
nrpe)
#echo "nrpe start"
killall nrpe
$NRPE/bin/nrpe -c $NRPE/etc/nrpe.cfg -d
;;
*)
echo "Warning: Wrong service name while restartiing..." >> $LOGPATH/restart.log
;;
esac
fi
let "i++"
done

exit 0

#End
[/code]