我 在win7下装了个 ubuntu 只给分配了20G 的空间 2G的swap 但是 有有些东西 是在win7中的一些盘符里头,就像d盘 。e盘等等...现在的系统也 能够进行访问...我向将win7下的d盘挂载...应该怎么作?
是sudo mount vfat /dev/sda1 /mnt/dosc
这个命令么?
我已经 mkdir /mnt/dosc
提示如下
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
求解释阿...
shenhao0129 于 2010-11-15 23:04:53发表:
建议直接写到/etc/fstab中去,每次手动挂载也不是那么爽
相思爱文 于 2010-11-15 22:46:41发表:
根据分区位置和文件系统(可以理解为分区格式,也就是fat32或NTFS)挂载
win7的安装方式不同,分区位置不一定。
/dev/sda1为第一主分区
/dev/sda2为第二主分区
/dev/sda5为第一逻辑区
/dev/sda6为第二逻辑区
…
mount 要加-t参数批定分区格式vfat或ntfs,不能直接写。贴中格式错误,正确方法见楼上
alick 于 2010-11-15 22:15:54发表:
一般,可以用[code]sudo mount -t ntfs /dev/sda1 /mnt/dosc[/code]来挂载C盘,解释如下:
-t指定分区格式,后面跟ntfs或者vfat
/dev/sda1指定挂载第一块硬盘的第一个分区,一般就是C盘所在分区。可以通过sudo fdisk -l查看确定。
/mnt/dosc指定挂载到的目录(文件夹),需要事先建立