yaokai299 于 2010-04-28 17:43:21发表:
看下
goodhunting 于 2010-04-28 09:00:13发表:
楼上的大侠，我这么做网卡还是显示一个大红叉，我用ifconfig命令，显示如下 [root@localhost ~]# ifconfig -a lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 b) TX bytes:480 (480.0 b) pan0 Link encap:Ethernet HWaddr AE:59:3C:15:E3:40 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
hantu 于 2010-04-27 23:50:12发表:
可以修改/boot/grub/grub.conf 配置文件，修改所启动的相应title段的kernel一行在其后加入pci=msi，记住要有空格隔开。
yaokai299 于 2010-04-28 17:43:21发表:
看下
goodhunting 于 2010-04-28 09:00:13发表:
楼上的大侠，我这么做网卡还是显示一个大红叉，我用ifconfig命令，显示如下
[root@localhost ~]# ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 b) TX bytes:480 (480.0 b)
pan0 Link encap:Ethernet HWaddr AE:59:3C:15:E3:40
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
hantu 于 2010-04-27 23:50:12发表:
可以修改/boot/grub/grub.conf 配置文件，修改所启动的相应title段的kernel一行在其后加入pci=msi，记住要有空格隔开。