求助，在Fedora12下安装vmware-tools的方法，详细一点啊。

共有 5 条评论

1. nxzcc 于 2010-02-09 08:46:17发表:

   没装过VM机

2. waterfrogcdw 于 2010-02-08 21:45:39发表:

   4# hantu
   
   我安装之后报错，如下错误，知道为什么吗？救救啊！
   
   The fast network device driver (vmxnet module) is used only for our fast
   networking interface. The rest of the software provided by VMware Tools is
   designed to work independently of this feature.
   If you wish to have the fast network driver enabled, you can install the driver
   by running vmware-config-tools.pl again after making sure that gcc, binutils,
   make and the kernel sources for your running kernel are installed on your
   machine. These packages are available on your distribution's installation CD.
   [ Press Enter key to continue ]
   
   None of the pre-built vmblock modules for VMware Tools is suitable for your
   running kernel. Do you want this program to try to build the vmblock module
   for your system (you need to have a C compiler installed on your system)?
   [yes]
   
   Extracting the sources of the vmblock module.
   
   Building the vmblock module.
   
   Using 2.6.x kernel build system.
   make: Entering directory `/tmp/vmware-config3/vmblock-only'
   make -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
   make[1]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
   CC [M] /tmp/vmware-config3/vmblock-only/linux/block.o
   In file included from /tmp/vmware-config3/vmblock-only/linux/os.h:35,
   from /tmp/vmware-config3/vmblock-only/linux/block.c:26:
   /tmp/vmware-config3/vmblock-only/./include/compat_wait.h:78: 错误：与‘poll_initwait’类型冲突
   include/linux/poll.h:70: 附注：‘poll_initwait’的上一个声明在此
   在包含自 /tmp/vmware-config3/vmblock-only/linux/vmblockInt.h：40 的文件中，
   从 /tmp/vmware-config3/vmblock-only/linux/block.c：29:
   /tmp/vmware-config3/vmblock-only/./include/vm_basic_types.h:108:7: 警告：“__FreeBSD__”未定义
   make[2]: *** [/tmp/vmware-config3/vmblock-only/linux/block.o] 错误 1
   make[1]: *** [_module_/tmp/vmware-config3/vmblock-only] 错误 2
   make[1]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
   make: *** [vmblock.ko] 错误 2
   make: Leaving directory `/tmp/vmware-config3/vmblock-only'
   Unable to build the vmblock module.
   
   The vmblock module enables dragging or copying files from within a host and
   dropping or pasting them onto your guest (host to guest drag and drop and file
   copy/paste). The rest of the software provided by VMware Tools is designed to
   work independently of this feature (including guest to host drag and drop and
   file copy/paste).
   
   If you would like the host to guest drag and drop and file copy/paste features,
   you can install the driver by running vmware-config-tools.pl again after making
   sure that gcc, binutils, make and the kernel sources for your running kernel
   are installed on your machine. These packages are available on your
   distribution's installation CD.
   [ Press Enter key to continue ]

3. hantu 于 2010-02-08 19:30:45发表:

   安装上内核源代码,应该就不会再报什么错了

4. lknudt 于 2010-02-08 17:40:47发表:

   这个好多地方都有，google搜一下

5. yulang8681951 于 2010-02-08 13:50:41发表:

   去我空间看吧，很简单的http://hi.baidu.com/yulangblog