红联Linux门户
Linux帮助

mount 如何加载可读写挂载区

发布时间:2009-09-16 23:29:42来源:红联作者:wcsl520
各位大大:
我用的是redhat linux 企业版,可以挂载ntfs分区,我下载了ntfs rpm for linux 的包,可以正常挂载ntfs windows 分区和U盘,但为什么就是不能挂载可读写的挂载区呢,难道 不是mount -t ntfs -o rw /dev/sda* /mnt / 这样不对吗?我也有加参数-o rw呀,网上找了很久很久了,百思不得其解,望各位大大们指教。先谢谢了。
文章评论

共有 4 条评论

  1. wcsl520 于 2009-09-20 15:44:53发表:

    在线等 谢谢各位大,新手请教

  2. wcsl520 于 2009-09-20 15:44:29发表:

    但是我是有安装fuse呀

  3. wcsl520 于 2009-09-20 15:41:01发表:

    我装了,不过报错,能帮我看看吗?d
    [root@jerry-linux ~]# fdisk -l

    Disk /dev/sda: 160.0 GB, 160041885696 bytes
    240 heads, 63 sectors/track, 20673 cylinders
    Units = cylinders of 15120 * 512 = 7741440 bytes

    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 2774 20971408+ 7 HPFS/NTFS
    /dev/sda2 2775 20673 135316440 f W95 Ext'd (LBA)
    /dev/sda5 2775 6242 26218048+ 7 HPFS/NTFS
    /dev/sda6 6243 13177 52428568+ 7 HPFS/NTFS
    /dev/sda7 13178 18731 41988208+ 7 HPFS/NTFS
    /dev/sda8 18732 18745 96358+ 83 Linux
    /dev/sda9 18745 20672 14570923+ 8e Linux LVM
    [root@jerry-linux ~]# clear

    [root@jerry-linux ~]# ntfs-3g
    No device specified.

    ntfs-3g 1.0 - Third Generation NTFS Driver

    Copyright (C) 2005-2006 Yura Pakhuchiy
    Copyright (C) 2006-2007 Szabolcs Szakacsits

    Usage: ntfs-3g device mount_point [-o options]

    Options: ro, force, locale, uid, gid, umask, fmask, dmask,
    show_sys_files, no_def_opts, streams_interface.
    Please see the details in the manual.

    Ntfs-3g news, support and information: http://www.ntfs-3g.org

    [root@jerry-linux ~]# ntfs-3g /dev/sda6 /mnt/e
    FATAL: Module fuse not found.
    fuse: device not found, try 'modprobe fuse' first
    FUSE mount point creation error: 没有那个设备
    Unmounting /dev/sda6 ()
    [root@jerry-linux ~]#

  4. eku123 于 2009-09-17 10:12:28发表:

    装ntfs-3g,然后用ntfs-3g /dev/xxx /mnt/xxx挂载,用umount卸载