安装rpm:lm_sensors
1一块PIII的主板，使用ITE IT8712F-A芯片：
modprobe i2c-proc
modprobe it87
sensors
即可得到监控信息了
2一块xeon板子，E7501北桥，使用winbond W83627HF芯片：
modprobe i2c-isa
modprobe w83781d
sensors
即可了，信息如下：
引用:w83627hf-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +1.48 V (min = +4.08 V, max = +4.08 V)
VCore 2: +2.49 V (min = +4.08 V, max = +4.08 V)
+3.3V: +3.39 V (min = +2.97 V, max = +3.63 V)
+5V: +5.07 V (min = +4.50 V, max = +5.48 V)
+12V: +12.46 V (min = +10.79 V, max = +13.11 V)
-12V: -12.03 V (min = -13.21 V, max = -10.90 V)
-5V: -5.70 V (min = -5.51 V, max = -4.51 V)
V5SB: +5.53 V (min = +4.50 V, max = +5.48 V)
VBat: +3.26 V (min = +2.70 V, max = +3.29 V)
fan1: 4687 RPM (min = 3000 RPM, div = 2)
fan2: 0 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2)
temp1: +60? (limit = +60?) sensor = thermistor
temp2: +30.0? (limit = +60?, hysteresis = +50?) sensor = PII/Celeron diode
temp3: +13.0? (limit = +60?, hysteresis = +50?) sensor = PII/Celeron diode
vid: +1.350 V
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
关键是知道监控芯片对应的驱动，然后加载，就可以了
当然这里面的驱动的层次关系，以硬件，深入的我就不知道了。
coolentboy 于 2006-08-11 10:42:03发表:
受教了