[i=s] 本帖最后由 liuyong 于 2009-5-18 15:34 编辑 [/i]
今天用yast管理程序安装好了显卡驱动，但重启后却不能进入桌面了。这是我的/etc/X11/xorg.conf文件内容，请帮忙看一下，我是从Fail-safe模式下进入桌面的。跟原来比，字体变小了，图标也有点模糊不清。在“应用程序浏览器”中查看“新应用程序”，里面多了个NVIDIA X Server Settings.打开有这个的提示信息，截图如下：[attach]14644[/attach]
[attach]14645[/attach]
下面是我的/etc/X11/xorg.conf文件的内容，我的显卡是七彩虹，NVIDIA GeForce 7300 SE/7200 GS,显示器是国产的19寸的KTC K－9005L：
# /.../
# SaX generated X11 config file
# Created on: 2009-05-17T04:50:55+0800.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "9"
Option "Device" "/dev/input/mice"
Option "Name" "ImExPS/2 Generic Explorer Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 338 270
HorizSync 30-80
Identifier "Monitor[0]"
ModelName "K-9005L"
Option "DPMS"
Option "PreferredMode" "1280x1024"
VendorName "KTC"
VertRefresh 43-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "GeForce 7300 SE"
BusID "2:0:0"
Driver "nvidia"
Identifier "Device[0]"
VendorName "NVidia"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
Option "Composite" "on"
EndSection
playyalp 于 2009-06-04 11:15:26发表:
学习了
太平桥 于 2009-05-28 17:11:08发表:
用nvidia 驱动的话，在安装的最后一屏，要选择同意 nvidia 驱动安装程序来 设置 Xorg.
simaopig 于 2009-05-25 11:03:41发表:
1280 * 1024 有啥问题吗？
jjwspj 于 2009-05-21 17:25:02发表:
Fail-safe模式 是怎样进的？
wzlwb 于 2009-05-19 22:00:34发表:
试着Modes那里只留一个分辨率。
wzlwb 于 2009-05-19 22:00:34发表:
试着Modes那里只留一个分辨率。
wzlwb 于 2009-05-19 21:59:51发表:
试着Modes那里只留一个分辨率。
wzlwb 于 2009-05-19 21:58:00发表:
肯定是分辨率的问题，“1280x1024”肯定不行，5：4的都不行，连备选都不行，只能用4：3的分辨率。
liuyong 于 2009-05-19 18:14:35发表:
这个子版块比较冷清吧，我改了分辨率还是不行，还是进不了x server
wzlwb 于 2009-05-19 16:41:28发表:
打错字了，是1280x960。怎么没见别的声音啊，这个坛的人都这样吗？
wzlwb 于 2009-05-18 19:18:28发表:
不要使用1280x1024分辨率，1290x960或1024x768吧，我的显示器和你的一样，也是同样的问题，改过来就好了。