[i=s] 本帖最后由 wenhuan2008 于 2009-4-5 22:57 编辑 [/i]
我是通过使用ndiswrapper－1.5.4来装的
在网上查了些资料，照着做的
安装到后面，当输入：
ndiswrapper -l
显示：bcmwl6 : driver installed
device (14E4:4315) present
写入配置文件：ndiswrapper -m
然后加载模块：modprobe ndiswrapper
再接下来配置：
（1）配置wpa_supplicant.conf文件：
vi /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
network={
ssid="any"
key_mgmt=NONE
}
（2）配置wpa_supplicant文件：
vi /etc/sysconfig/wpa_supplicant
将该文件内容设置为：
# wlan0 and wifi0
# INTERFACES="-iwlan0 -iwifi0"
INTERFACES="-iwlan0"
# ndiswrapper and prism
# DRIVERS="-Dndiswrapper -Dprism"
DRIVERS="-Dndiswrapper"
最后：输入：iwlist scanning,
输出如下：
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
请问怎么回事？
[size=3][/size][size=4][/size]
