声卡没有驱动，帮帮忙吧！

共有 16 条评论

1. ermaima 于 2009-03-21 21:28:48发表:

   我的是戴尔，安装了红旗之后，插耳机有声音而自带音响没有声音，在Ubuntu下都有声音的？这设怎么回事？

2. 相思爱文 于 2009-03-20 14:17:03发表:

   我就是845主板，直接安装就有声音了。

3. dxb20040101 于 2009-03-20 13:19:14发表:

   能不能不重装系统就能解决声卡的驱动问题呀,我觉得这个声卡是可以驱动的

4. hyqhyq_3 于 2009-03-19 17:26:30发表:

   我曾经在ubuntu中不能驱动声卡，但到了fedora10，可以驱动，所以，升级你的系统是可以解决问题的

5. 坤坤 于 2009-03-19 13:59:45发表:

   昨天我装了红旗7.0奥运版，真的很好用，界面很友好，很适合像我这样的初学者
   里面带了很多的驱动，现在我的声卡也驱起来了
   谢谢大家！
   感谢红联及于其相关的所有人，谢谢你们！

6. dxb20040101 于 2009-03-17 14:25:08发表:

   红旗6sp1 技加845G主板
   
   装好红旗后声卡无法驱动，到网上找了好多方法都没有成功，最后尝试更新ALSA，到ALSA官网上下了三个文件分别是driver,utils lib 三个包，解压后分别./configure make make install
   drivert和lib包都能成功，只有utilsb出错
   root@dxb alsa-utils-1.0.19]# make
   Making all in include
   make[1]: Entering directory `/root/Desktop/alsa-utils-1.0.19/include'
   make all-am
   make[2]: Entering directory `/root/Desktop/alsa-utils-1.0.19/include'
   make[2]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/include'
   make[1]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/include'
   Making all in alsactl
   make[1]: Entering directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   Making all in init
   make[2]: Entering directory `/root/Desktop/alsa-utils-1.0.19/alsactl/init'
   make[2]: Nothing to be done for `all'.
   make[2]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/alsactl/init'
   make[2]: Entering directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   if gcc -DHAVE_CONFIG_H -I. -I. -I../include -g -O2 -MT alsactl.o -MD -MP -MF ".deps/alsactl.Tpo" -c -o alsactl.o alsactl.c; \
   then mv -f ".deps/alsactl.Tpo" ".deps/alsactl.Po"; else rm -f ".deps/alsactl.Tpo"; exit 1; fi
   alsactl.c: In function ‘main’:
   alsactl.c:166: warning: assignment from incompatible pointer type
   if gcc -DHAVE_CONFIG_H -I. -I. -I../include -g -O2 -MT state.o -MD -MP -MF ".deps/state.Tpo" -c -o state.o state.c; \
   then mv -f ".deps/state.Tpo" ".deps/state.Po"; else rm -f ".deps/state.Tpo"; exit 1; fi
   if gcc -DHAVE_CONFIG_H -I. -I. -I../include -g -O2 -MT utils.o -MD -MP -MF ".deps/utils.Tpo" -c -o utils.o utils.c; \
   then mv -f ".deps/utils.Tpo" ".deps/utils.Po"; else rm -f ".deps/utils.Tpo"; exit 1; fi
   if gcc -DHAVE_CONFIG_H -I. -I. -I../include -g -O2 -MT init_parse.o -MD -MP -MF ".deps/init_parse.Tpo" -c -o init_parse.o init_parse.c; \
   then mv -f ".deps/init_parse.Tpo" ".deps/init_parse.Po"; else rm -f ".deps/init_parse.Tpo"; exit 1; fi
   gcc -g -O2 -o alsactl alsactl.o state.o utils.o init_parse.o -lasound -lm -ldl -lpthread
   xmlto man alsactl_init.xml
   make[2]: xmlto：命令未找到
   make[2]: *** [alsactl_init.7] 错误 127
   make[2]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   make[1]: *** [all-recursive] 错误 1
   make[1]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   make: *** [all-recursive] 错误 1
   [root@dxb alsa-utils-1.0.19]# make install
   Making install in include
   make[1]: Entering directory `/root/Desktop/alsa-utils-1.0.19/include'
   make[2]: Entering directory `/root/Desktop/alsa-utils-1.0.19/include'
   make[2]: Nothing to be done for `install-exec-am'.
   make[2]: Nothing to be done for `install-data-am'.
   make[2]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/include'
   make[1]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/include'
   Making install in alsactl
   make[1]: Entering directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   Making install in init
   make[2]: Entering directory `/root/Desktop/alsa-utils-1.0.19/alsactl/init'
   make[3]: Entering directory `/root/Desktop/alsa-utils-1.0.19/alsactl/init'
   make[3]: Nothing to be done for `install-exec-am'.
   test -z "/usr/share/alsa/init" || mkdir -p -- "/usr/share/alsa/init"
   /usr/bin/install -c -m 644 '00main' '/usr/share/alsa/init/00main'
   /usr/bin/install -c -m 644 'default' '/usr/share/alsa/init/default'
   /usr/bin/install -c -m 644 'help' '/usr/share/alsa/init/help'
   /usr/bin/install -c -m 644 'info' '/usr/share/alsa/init/info'
   /usr/bin/install -c -m 644 'test' '/usr/share/alsa/init/test'
   /usr/bin/install -c -m 644 'hda' '/usr/share/alsa/init/hda'
   make[3]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/alsactl/init'
   make[2]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/alsactl/init'
   make[2]: Entering directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   xmlto man alsactl_init.xml
   make[2]: xmlto：命令未找到
   make[2]: *** [alsactl_init.7] 错误 127
   make[2]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   make[1]: *** [install-recursive] 错误 1
   make[1]: Leaving directory `/root/Desktop/alsa-utils-1.0.19/alsactl'
   make: *** [install-recursive] 错误 1
   [root@dxb alsa-utils-1.0.19]# alsactl -v
   alsactl version 1.0.17
   
   driver和lib两个包都能正常,就是这个utils有问题

7. 大宝 于 2009-03-16 19:39:52发表:

   试着编译一下ALSA驱动噻
   再不行试试OSS的嘛
   如果还不行，编译最新的内核吧~

8. 坤坤 于 2009-03-16 13:50:33发表:

   我的机器是宏基的
   声卡是：Intel Corporation 82801H (ICH8 Famil (rev 03)
   目前不好使
   我想试试奥运版的，不知行不行

9. 坤坤 于 2009-03-16 13:47:17发表:

   新发布的红旗Linux奥运版里有新的驱动吗？
   装一下试试
   也许声卡能好使呢！

10. dxb20040101 于 2009-03-15 18:40:33发表:

    我的系统是红旗6sp1 声卡为技加845G集成,到网上找了好多的方法都试过了，都是不成功
    
    Now ALSA is ready to use.
    For adjustment of volumes, use your favorite mixer.
    
    Have a lot of fun!
    
    
    [root@dxb ~]# lsmod
    Module Size Used by
    snd_seq_dummy 7940 0
    snd_seq_oss 35476 0
    snd_seq_midi_event 11008 1 snd_seq_oss
    snd_seq 51380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 12172 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 42624 0
    snd_mixer_oss 19840 1 snd_pcm_oss
    snd_pcm 75012 1 snd_pcm_oss
    snd_timer 25092 2 snd_seq,snd_pcm
    snd 54324 8 snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 9540 1 snd
    rfcomm 39576 0
    hidp 24960 2
    l2cap 28160 10 rfcomm,hidp
    bluetooth 50772 5 rfcomm,hidp,l2cap
    nf_conntrack_ipv4 12804 2
    xt_state 6016 2
    nf_conntrack 47176 2 nf_conntrack_ipv4,xt_state
    nfnetlink 8216 2 nf_conntrack_ipv4,nf_conntrack
    xt_tcpudp 6528 4
    ipt_REJECT 8064 1
    iptable_filter 6272 1
    ip_tables 15428 1 iptable_filter
    x_tables 14596 4 xt_state,xt_tcpudp,ipt_REJECT,ip_tables
    i915 24960 2
    drm 68372 3 i915
    usb_storage 61320 0
    ipv6 248572 14
    vfat 15360 7
    fat 47260 1 vfat
    dm_mirror 23168 0
    dm_multipath 18952 0
    dm_mod 49072 2 dm_mirror,dm_multipath
    video 19344 0
    output 6912 1 video
    sbs 20360 0
    dock 12432 0
    battery 14472 0
    ac 8836 0
    parport_pc 24980 1
    lp 14704 0
    parport 31560 2 parport_pc,lp
    ide_cd 37252 0
    cdrom 33060 1 ide_cd
    ac97_bus 5760 0
    8139cp 23552 0
    8139too 25088 0
    mii 8064 2 8139cp,8139too
    button 11024 0
    iTCO_wdt 12964 0
    iTCO_vendor_support 6404 1 iTCO_wdt
    i2c_i801 11408 0
    i2c_i810 7684 0
    i2c_algo_bit 8964 1 i2c_i810
    intel_agp 22932 1
    i2c_core 21248 3 i2c_i801,i2c_i810,i2c_algo_bit
    serio_raw 9860 0
    snd_page_alloc 14088 1 snd_pcm
    agpgart 28340 3 drm,intel_agp
    floppy 52020 0
    ide_disk 18688 12
    ata_generic 10372 0
    ata_piix 18308 0
    libata 94796 2 ata_generic,ata_piix
    piix 11396 0 [permanent]
    generic 7684 0 [permanent]
    ide_core 105156 4 ide_cd,ide_disk,piix,generic
    ext3 115720 2
    jbd 51368 1 ext3
    ehci_hcd 32268 0
    ohci_hcd 21636 0
    uhci_hcd 24208 0
    [root@dxb ~]# lspci -v
    00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
    Subsystem: Giga-byte Technology GA-8PE667 Ultra
    Flags: bus master, fast devsel, latency 0
    Memory at d0000000 (32-bit, prefetchable) [size=128M]
    Capabilities: [e4] Vendor Specific Information
    
    00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) (prog-if 00 [VGA controller])
    Subsystem: Giga-byte Technology Unknown device 2562
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at d8000000 (32-bit, prefetchable) [size=128M]
    Memory at e0100000 (32-bit, non-prefetchable) [size=512K]
    Capabilities: [d0] Power Management version 1
    
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Giga-byte Technology Unknown device 24c2
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at d800 [size=32]
    
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Giga-byte Technology Unknown device 24c2
    Flags: bus master, medium devsel, latency 0, IRQ 17
    I/O ports at d000 [size=32]
    
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Giga-byte Technology Unknown device 24c2
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at d400 [size=32]
    
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
    Subsystem: Giga-byte Technology Unknown device 5004
    Flags: bus master, medium devsel, latency 0, IRQ 19
    Memory at e0180000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: e0000000-e00fffff
    
    00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
    Flags: bus master, medium devsel, latency 0
    
    00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Giga-byte Technology GA-8PE667 Ultra
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at f000 [size=16]
    Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
    
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
    Subsystem: Giga-byte Technology GA-8PE667 Ultra
    Flags: medium devsel, IRQ 20
    I/O ports at 5000 [size=32]
    
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
    Subsystem: Giga-byte Technology Unknown device a205
    Flags: bus master, medium devsel, latency 0, IRQ 5
    I/O ports at e000 [size=256]
    I/O ports at e400 [size=64]
    Memory at e0181000 (32-bit, non-prefetchable) [size=512]
    Memory at e0182000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [50] Power Management version 2
    
    01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    Subsystem: Giga-byte Technology GA-7VM400M/7VT600 Motherboard
    Flags: bus master, medium devsel, latency 32, IRQ 21
    I/O ports at c000 [size=256]
    Memory at e0000000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [50] Power Management version 2

11. dxb20040101 于 2009-03-15 18:35:55发表:

    为什么我用alsaconf发现了声卡，；但还是驱动不了呀

12. ttll8812 于 2009-03-13 19:40:08发表:

    我也碰到过这种情况，也在期待解决方法.

13. ttll8812 于 2009-03-13 19:39:02发表:

    {:2_91:}

14. 蔡万钊 于 2009-03-13 18:50:47发表:

    到官方网站下载Linux驱动
    我的asus电脑就是这么解决的
    
    如果是小厂商，也许没有驱动
    建议退货
    理由：硬件无法正常工作

15. dxb20040101 于 2009-03-13 18:14:41发表:

    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
    Subsystem: Giga-byte Technology Unknown device a205
    Flags: bus master, medium devsel, latency 0, IRQ 5
    I/O ports at e000 [size=256]
    I/O ports at e400 [size=64]
    Memory at e0181000 (32-bit, non-prefetchable) [size=512]
    Memory at e0182000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [50] Power Management version 2
    
    这是我的声卡信息，我也是驱动不了，不知道怎么搞呀

16. lirry 于 2009-03-10 14:02:49发表:

    看清楚你的声卡的芯片,自己到它官网上下个装上就行了