我可以在图形用户界面下连接的无限网络，但是在控制台就就无法连接上。
iwlist eth1 scanning 结果：
Cell 02 - Address: 00:0F:E2:0F:9E:ED
ESSID:"xxxxxx"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:79 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 994ms ago
我的wpa_supplicant.conf 文件：
ctrl_interface=/var/run/wpa_supplicant
#ctrl_interface_group=wheel
#ctrl_interface_group=0
#ap_scan=1
network={
ssid="xxxxxx"
key_mgmt=WPA-PSK
proto=RSN
pairwise=TKIP
group=TKIP
psk="mypassword"
}
我的ifcfg_eth1文件：
# Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter
DEVICE=eth1
HWADDR=00:0c:f1:06:94:b9
ONBOOT=yes
BOOTPROTO=dhcp
TYPE=Wireless
USERCTL=yes
PEERDNS=yes
IPV6INIT=no
NM_CONTROLLED=yes
ESSID=
CHANNEL=
MODE=Auto
RATE=auto
我使用的命令：
wpa_supplicant -ieth1 -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf
结果是：
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
如果把proto=RSN 换成是proto=WPA的结果是：
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:0f:e2:0f:9e:ed (SSID='xxxxxx' freq=2462 MHz)
ioctl[SIOCSIWFREQ]: Operation not supported
Association request to the driver failed
Associated with 00:00:00:00:00:00
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
那位大侠帮帮忙吧？
谢谢了
