sis672显卡，看了这个帖子http://forum.ubuntu.org.cn/viewtopic.php?p=706908&sid=328e9986d7638d48c13012cd1e8489ac
直接用了他给的驱动和xorg.conf文件－－－－－－－－－编译同不过报错！
现在分辨率也能调到1280 800了，可是在开机进度条完了之后，进入登陆界面之前，屏幕不太正常！
先是屏幕最下方开始变绿，从下往上变绿，最后还能成功进如登陆画面，进了系统也一切正常！
这是怎么回事？还有这样子会伤显示器吗？
机子是神舟的天运F233R
配置－－主板: SIS M672+SIS968SIS芯片,
CPU 类型 Mobile DualCore Intel Merom, 1600 MHz (12 x 133)
显示卡 SiS Mirage 3 Graphics (128 MB) 芯片类型 SiS672 series %X3W(x\&
声卡 SiS High Definition Audio Controller
网卡 SiS191 1000/100/10 Ethernet Device
[ 本帖最后由 a407121393 于 2008-10-12 08:13 编辑 ]
kooltuo 于 2011-11-10 19:21:16发表:
gggggggggggggggggggggggggggggggggjj将就一下吧。
mercuryhg 于 2008-12-05 16:15:34发表:
可能是你的配置文件有问题，你换成他提供的那个文件试试啊，我的也是神舟的SIS，8。04使用是没有问题的。
lixz007 于 2008-10-14 01:34:20发表:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "SiS"
Busid "PCI:1:0:0"
Driver "sis"
Screen 0
Vendorname "SiS"
Option "EnableSiSCtrl" "yes"
Option "XvDefaultAdaptor" "Blitter"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
a407121393 于 2008-10-12 08:33:52发表:
lixz007－－－－－
能把你的xorg.conf文件发给我参考吗？我邮箱：a407121393@163.com
[ 本帖最后由 a407121393 于 2008-10-12 08:48 编辑 ]
lixz007 于 2008-10-12 01:43:37发表:
可以直接用了他给的驱动，也就是sudo cp......................
但是不能直接用他的xorg.conf文件，把他贴出来的那 一段代码 替换你的电脑 xorg.conf 里相对应的一段才行，
我的电脑和你的一样的芯片组的，就是这样弄好的
Number 于 2008-10-11 20:45:45发表:
可能要装驱动吧，水平和垂直分辨率设错才影响到显示器