主程序包：mplayer-checkout-snapshot.tar.bz2
字体包：font-anal-iso-8859-l.tar.bz2
解码包：essential-20071007.tar.bz2
windows-all-20071007.zip
皮肤包：Abyss-1.7.tar.bz2
首先解压解码包：
tar -vjfx essen -tar.bzw (essen为上面的解码包，这里就不把名字全打上了)
unzip windows .zip
由于mplayer默认的安装路径为
usr/local /mplayer/skin
usr/local/etc/mplayer
所以我把字体和皮肤包都放到了这个目录下；其中皮肤包是可以不用解压，直接放到skin目录下。解码包默认的路径为：
mv essen* usr/local/lib/codecs
mv windows* usr/local/lib/win32
然后我就在/home/x iaose/mplayer下直接./configure的
这样安装完后，进入/usr/local/mplayer有mpalyer的图标，但是我双击运行却没有反应。还请各位前辈不吝指教新人！
如果安装成功一定出个教程，希望能帮上更多的新人！
刚才发错版了
[ 本帖最后由 bindy 于 2008-9-22 18:44 编辑 ]
bindy 于 2008-09-22 20:41:13发表:
谢谢(()):s
jiuny0209 于 2008-09-22 19:15:34发表:
怕你找不到
all codecs
http://www.mplayerhq.hu/MPlayer/releases/codecs/
jiuny0209 于 2008-09-22 19:13:50发表:
http://www.mplayerhq.hu/DOCS/HTML-single/en/MPlayer.html
jiuny0209 于 2008-09-22 19:12:29发表:
其中皮肤包是可以不用解压
============
and 我既得??要解开
(my keyin is bad)
bindy 于 2008-09-22 19:08:44发表:
额，我不是去看readme看看。
jiuny0209 于 2008-09-22 19:07:23发表:
sorry......i don't know.......
jiuny0209 于 2008-09-22 19:05:43发表:
path不会丢?了吧！
/usr/local/share/mplayer/skins
/usr/lib/codecs
2.3. What about the GUI?
The GUI needs GTK 1.2.x or GTK 2.0 (it isn't fully GTK, but the panels are). The skins are stored in PNG format, so GTK, libpng (and their devel stuff, usually called gtk-dev and libpng-dev) has to be installed. You can build it by specifying --enable-gui during ./configure. Then, to turn on GUI mode, you have to execute the gmplayer binary.
As MPlayer doesn't have a skin included, you have to download them if you want to use the GUI. See the download page. They should be extracted to the usual system-wide directory ($PREFIX/share/mplayer/skins), or to $HOME/.mplayer/skins. MPlayer by default looks in these directories for a directory named default, but you can use the -skin newskin option, or the skin=newskin config file directive to use the skin in */skins/newskin directory.
bindy 于 2008-09-22 18:54:25发表:
./cnofigure --enable-gui
我用了这个。
jiuny0209 于 2008-09-22 18:48:30发表:
有open gui??
configure --help
另用这包解码包
all-20071007.tar.bz2