用的2410的开发板做试验，固化好vivi和kernel 用vivi启动不了显示如下
vivi> boot
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00100000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/2 init=/linuxrc console=tty"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux........................................................... .
Linux version 2.4.18-rmk7-pxa1 (root@localhost) (gcc version 2.95.3 20010315 (r5
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/mtdblock/2 init=/linuxrc console=ttyS0
DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62476KB available (1473K code, 440K data, 76K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NStarting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410
Console: switching to colour frame buffer device 80x30
Installed S3C2410 frame buffer for TFT 640x480 LCD.
pty: 256 Unix98 ptys configured
leds initialized
s3c2410-ts initialized
S3C2410 Real Time Clock Driver v0.1
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300
cs89x0 media RJ-45, IRQ 37
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
UDA1341 audio driver initialized
NAND device: ManufacturVFS: Mounted root (yaffs filesystem).
Warning: unable to mount devfs, err: -2
Freeing init memory: 76K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
到这里就不行了 那位能说说 是什么原因吗 谢谢了 最好能详细点
