红联Linux门户
Linux帮助

Install VMware-server on openSUSE11.0

发布时间:2008-10-08 16:09:24来源:红联作者:Nzocrlma
1.Download VMware-server-1.0.6-91891.i386.rpm
2.sudo rpm -ivh VMware-server-1.0.6-91891.i386.rpm
3.sudo /usr/bin/vmware-config.pl
Here 2 problems happen:
***
Your kernel was built with "gcc" version "4.3.1", while you are trying to use
"/usr/bin/gcc" version "4.3". This configuration is not recommended and VMware
Tools may crash if you'll continue. Please try to use exactly same compiler as
one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.3" anyway? [no] yes

What is the location of the directory of C header files that match your running
kernel? [/usr/src/linux/include] /usr/src/linux-obj/x86_64/default/include/

The directory of kernel headers (version 2.6.25.11-0.1-default) does not match
your running kernel (version 2.6.25.5-1.1-pae). Even if the module were to
compile successfully, it would not load into the running kernel.

What is the location of the directory of C header files that match your running
kernel? [/usr/src/linux/include]

The solution is to download gcc-4.3.1.tar.gz and install it:
---
gcc-4.3.1...
---
mount the iso for rpm installation.
# sudo mount -o loop /home/qguan/openSUSE-11.0-DVD-i386.iso /mnt/iso/
download gcc-4.3.1.
# tar zxvf gcc-4.3.1.tar.gz
# cd gcc-4.3.1/
# vi README
following the INSTALL...
# cd INSTALL/
# mkdir gccobj
# cd gccobj/
# ../configure
# make CFLAGS='-O' LIBCFLAGS='-g -O2' LIBCXXFLAGS='-g -O2 -fno-implicit-templates' bootstrap
# export TCL_LIBRARY=/usr/share/tcl/
# export DEJAGNULIBS=/usr/share/dejagnu/
# make -k check
# make install
----
C header files ...
---
try yum install...
# sudo yum install linux-kernel-headers-`uname -r`
actually, it already in the open suse iso.
# ls /mnt/iso/suse/noarch/|grep linux
# sudo rpm -ivh /mnt/iso/suse/noarch/linux-kernel-headers-2.6.25-8.1.noarch.rpm --force
# find -name "*kernel*"
# rpm -ivh /mnt/iso/suse/i586/kernel-source-2.6.25.5-1.1.i586.rpm
# rpm -ivh /mnt/iso/suse/i586/kernel-default-2.6.25.5-1.1.i586.rpm
------------------

4.after the above steps, do /usr/bin/vmware-config.pl again..
[email protected]:~> sudo /usr/bin/vmware-config.pl
root's password:
Making sure services for VMware Server are stopped.

Stopping VMware services:
Virtual machine monitor done

Configuring fallback GTK+ 2.4 libraries.

In which directory do you want to install the mime type icons?
[/usr/share/icons]

What directory contains your desktop menu entry files? These files have a
.desktop file extension. [/usr/share/applications]

In which directory do you want to install the application's icon?
[/usr/share/pixmaps]

/usr/share/applications/vmware-server.desktop: warning: value "vmware-server.png" for key "Icon" in group "Desktop Entry" is an icon name with an extension, but there should be no extension as described in the Icon Theme Specification if the value is not an absolute path
/usr/share/applications/vmware-console-uri-handler.desktop: warning: value "vmware-server.png" for key "Icon" in group "Desktop Entry" is an icon name with an extension, but there should be no extension as described in the Icon Theme Specification if the value is not an absolute path
Trying to find a suitable vmmon module for your running kernel.

None of the pre-built vmmon modules for VMware Server is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]

Using compiler "/usr/local/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.25.5-1.1-pae/build/include]

Extracting the sources of the vmmon module.

Building the vmmon module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmmon-only'
make -C /lib/modules/2.6.25.5-1.1-pae/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make -C /usr/src/linux-2.6.25.5-1.1 O=/usr/src/linux-2.6.25.5-1.1-obj/i386/pae/. modules
CC [M] /tmp/vmware-config0/vmmon-only/linux/driver.o
CC [M] /tmp/vmware-config0/vmmon-only/linux/hostif.o
CC [M] /tmp/vmware-config0/vmmon-only/common/cpuid.o
CC [M] /tmp/vmware-config0/vmmon-only/common/hash.o
CC [M] /tmp/vmware-config0/vmmon-only/common/memtrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/phystrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/task.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmx86.o
/tmp/vmware-config0/vmmon-only/common/vmx86.c: In function ‘Vmx86_GetkHzEstimate’:
/tmp/vmware-config0/vmmon-only/common/vmx86.c:1899: warning: passing argument 4 of ‘Div643264’ from incompatible pointer type
/tmp/vmware-config0/vmmon-only/common/vmx86.c:1908: warning: passing argument 4 of ‘Div643232’ from incompatible pointer type
CC [M] /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: modpost: module vmmon.ko uses symbol 'init_mm' marked UNUSED
CC /tmp/vmware-config0/vmmon-only/vmmon.mod.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
The module loads perfectly in the running kernel.

Do you want networking for your virtual machines? (yes/no/help) [yes]

Configuring a bridged network for vmnet0.

The following bridged networks have been defined:

. vmnet0 is bridged to eth0

All your ethernet interfaces are already bridged.

Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]

Configuring a NAT network for vmnet8.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

Probing for an unused private subnet (this can take some time)...

The subnet 192.168.191.0/255.255.255.0 appears to be unused.

The following NAT networks have been defined:

. vmnet8 is a NAT network on private subnet 192.168.191.0.

Do you wish to configure another NAT network? (yes/no) [no]

Do you want to be able to use host-only networking in your virtual machines?
[yes]

Configuring a host-only network for vmnet1.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

Probing for an unused private subnet (this can take some time)...

The subnet 172.16.176.0/255.255.255.0 appears to be unused.

The following host-only networks have been defined:

. vmnet1 is a host-only network on private subnet 172.16.176.0.

Do you wish to configure another host-only network? (yes/no) [no]

Extracting the sources of the vmnet module.

Building the vmnet module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmnet-only'
make -C /lib/modules/2.6.25.5-1.1-pae/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make -C /usr/src/linux-2.6.25.5-1.1 O=/usr/src/linux-2.6.25.5-1.1-obj/i386/pae/. modules
CC [M] /tmp/vmware-config0/vmnet-only/driver.o
CC [M] /tmp/vmware-config0/vmnet-only/hub.o
CC [M] /tmp/vmware-config0/vmnet-only/userif.o
CC [M] /tmp/vmware-config0/vmnet-only/netif.o
CC [M] /tmp/vmware-config0/vmnet-only/bridge.o
CC [M] /tmp/vmware-config0/vmnet-only/procfs.o
CC [M] /tmp/vmware-config0/vmnet-only/smac_compat.o
SHIPPED /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: could not find /tmp/vmware-config0/vmnet-only/.smac_linux.x386.o.cmd for /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
CC /tmp/vmware-config0/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/vmware-config0/vmnet-only'
The module loads perfectly in the running kernel.

The default port : 902 is not free. We have selected a suitable alternative
port for VMware Server use. You may override this value now.
Remember to use this port when connecting to this server.
Please specify a port for remote console connections to use [904]

WARNING: VMware Server has been configured to run on a port different from the
default port. Remember to use this port when connecting to this server.
Shutting down xinetd: done
Starting INET services. (xinetd) done
Configuring the VMware VmPerl Scripting API.

Building the VMware VmPerl Scripting API.

Using compiler "/usr/local/bin/gcc". Use environment variable CC to override.

Installing the VMware VmPerl Scripting API.

The installation of the VMware VmPerl Scripting API succeeded.

Generating SSL Server Certificate

In which directory do you want to keep your virtual machine files?
[/var/lib/vmware/Virtual Machines]

The path "/var/lib/vmware/Virtual Machines" does not exist currently. This
program is going to create it, including needed parent directories. Is this
what you want? [yes]

Please enter your 20-character serial number.

Type XXXXX-XXXXX-XXXXX-XXXXX or 'Enter' to cancel: 62521-EAQ44-RC1E1-4H3V4

The serial number 62521-EAQ44-RC1E1-4H3V4 is invalid.

Please enter your 20-character serial number.

Type XXXXX-XXXXX-XXXXX-XXXXX or 'Enter' to cancel:

You cannot power on any virtual machines until you enter a valid serial number.
To enter the serial number, run this configuration program again, or choose
'Help > Enter Serial Number' in the virtual machine console.

Starting VMware services:
Virtual machine monitor done
Virtual ethernet done
Bridged networking on /dev/vmnet0 done
Host-only networking on /dev/vmnet1 (background) done
Host-only networking on /dev/vmnet8 (background) done
NAT service on /dev/vmnet8 done

The configuration of VMware Server 1.0.6 build-91891 for Linux for this running
kernel completed successfully.

[email protected]:~>
文章评论

共有 0 条评论