红联Linux门户
Linux帮助

linux实现最简单的虚拟文件系统代码--VFS

发布时间:2006-08-22 09:05:56来源:红联作者:hfh08
[code]This is the "lwnfs" module source which goes along with this article on virtual filesystems from the Porting Drivers to 2.6 series.

/*
* Demonstrate a trivial filesystem using libfs.
*
* Copyright 2002, 2003 Jonathan Corbet
* This file may be redistributed under the terms of the GNU GPL.
*
* Chances are that this code will crash your system, delete your
* nethack high scores, and set your disk drives on fire. You have
* been warned.
*/
#include
#include
#include
#include /* PAGE_CACHE_SIZE */
#include /* This is where libfs stuff is declared */
#include
#include /* copy_to_user */

/*
* Boilerplate stuff.
*/
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jonathan Corbet");

#define LFS_MAGIC 0x19980122


/*
* Anytime we make a file or directory in our filesystem we need to
* come up with an inode to represent it internally. This is
* the function that does that job. All that's really interesting
* is the "mode" parameter, which says whether this is a directory
* or file, and gives the permissions.
*/
static struct inode *lfs_make_inode(struct super_block *sb, int mode)
{
struct inode *ret = new_inode(sb);

if (ret) {
ret->i_mode = mode;
ret->i_uid = ret->i_gid = 0;
ret->i_blksize = PAGE_CACHE_SIZE;
ret->i_blocks = 0;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
}
return ret;
}


/*
* The operations on our "files".
*/

/*
* Open a file. All we have to do here is to copy over a
* copy of the counter pointer so it's easier to get at.
*/
static int lfs_open(struct inode *inode, struct file *filp)
{
filp->private_data = inode->u.generic_ip;
return 0;
}

#define TMPSIZE 20
/*
* Read a file. Here we increment and read the counter, then pass it
* back to the caller. The increment only happens if the read is done
* at the beginning of the file (offset = 0); otherwise we end up counting
* by twos.
*/
static ssize_t lfs_read_file(struct file *filp, char *buf,
size_t count, loff_t *offset)
{
atomic_t *counter = (atomic_t *) filp->private_data;
int v, len;
char tmp[TMPSIZE];
/*
* Encode the value, and figure out how much of it we can pass back.
*/
v = atomic_read(counter);
if (*offset > 0)
v -= 1; /* the value returned when offset was zero */
else
atomic_inc(counter);
len = snprintf(tmp, TMPSIZE, "%d\n", v);
if (*offset > len)
return 0;
if (count > len - *offset)
count = len - *offset;
/*
* Copy it back, increment the offset, and we're done.
*/
if (copy_to_user(buf, tmp + *offset, count))
return -EFAULT;
*offset += count;
return count;
}

/*
* Write a file.
*/
static ssize_t lfs_write_file(struct file *filp, const char *buf,
size_t count, loff_t *offset)
{
atomic_t *counter = (atomic_t *) filp->private_data;
char tmp[TMPSIZE];
/*
* Only write from the beginning.
*/
if (*offset != 0)
return -EINVAL;
/*
* Read the value from the user.
*/
if (count >= TMPSIZE)
return -EINVAL;
memset(tmp, 0, TMPSIZE);
if (copy_from_user(tmp, buf, count))
return -EFAULT;
/*
* Store it in the counter and we are done.
*/
atomic_set(counter, simple_strtol(tmp, NULL, 10));
return count;
}


/*
* Now we can put together our file operations structure.
*/
static struct file_operations lfs_file_ops = {
.open = lfs_open,
.read = lfs_read_file,
.write = lfs_write_file,
};


/*
* Create a file mapping a name to a counter.
*/
static struct dentry *lfs_create_file (struct super_block *sb,
struct dentry *dir, const char *name,
atomic_t *counter)
{
struct dentry *dentry;
struct inode *inode;
struct qstr qname;
/*
* Make a hashed version of the name to go with the dentry.
*/
qname.name = name;
qname.len = strlen (name);
qname.hash = full_name_hash(name, qname.len);
/*
* Now we can create our dentry and the inode to go with it.
*/
dentry = d_alloc(dir, &qname);
if (! dentry)
goto out;
inode = lfs_make_inode(sb, S_IFREG | 0644);
if (! inode)
goto out_dput;
inode->i_fop = &lfs_file_ops;
inode->u.generic_ip = counter;
/*
* Put it all into the dentry cache and we're done.
*/
d_add(dentry, inode);
return dentry;
/*
* Then again, maybe it didn't work.
*/
out_dput:
dput(dentry);
out:
return 0;
}


/*
* Create a directory which can be used to hold files. This code is
* almost identical to the "create file" logic, except that we create
* the inode with a different mode, and use the libfs "simple" operations.
*/
static struct dentry *lfs_create_dir (struct super_block *sb,
struct dentry *parent, const char *name)
{
struct dentry *dentry;
struct inode *inode;
struct qstr qname;

qname.name = name;
qname.len = strlen (name);
qname.hash = full_name_hash(name, qname.len);
dentry = d_alloc(parent, &qname);
if (! dentry)
goto out;

inode = lfs_make_inode(sb, S_IFDIR | 0644);
if (! inode)
goto out_dput;
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;

d_add(dentry, inode);
return dentry;

out_dput:
dput(dentry);
out:
return 0;
}



/*
* OK, create the files that we export.
*/
static atomic_t counter, subcounter;

static void lfs_create_files (struct super_block *sb, struct dentry *root)
{
struct dentry *subdir;
/*
* One counter in the top-level directory.
*/
atomic_set(&counter, 0);
lfs_create_file(sb, root, "counter", &counter);
/*
* And one in a subdirectory.
*/
atomic_set(&subcounter, 0);
subdir = lfs_create_dir(sb, root, "subdir");
if (subdir)
lfs_create_file(sb, subdir, "subcounter", &subcounter);
}



/*
* Superblock stuff. This is all boilerplate to give the vfs something
* that looks like a filesystem to work with.
*/

/*
* Our superblock operations, both of which are generic kernel ops
* that we don't have to write ourselves.
*/
static struct super_operations lfs_s_ops = {
.statfs = simple_statfs,
.drop_inode = generic_delete_inode,
};

/*
* "Fill" a superblock with mundane stuff.
*/
static int lfs_fill_super (struct super_block *sb, void *data, int silent)
{
struct inode *root;
struct dentry *root_dentry;
/*
* Basic parameters.
*/
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
sb->s_magic = LFS_MAGIC;
sb->s_op = &lfs_s_ops;
/*
* We need to conjure up an inode to represent the root directory
* of this filesystem. Its operations all come from libfs, so we
* don't have to mess with actually *doing* things inside this
* directory.
*/
root = lfs_make_inode (sb, S_IFDIR | 0755);
if (! root)
goto out;
root->i_op = &simple_dir_inode_operations;
root->i_fop = &simple_dir_operations;
/*
* Get a dentry to represent the directory in core.
*/
root_dentry = d_alloc_root(root);
if (! root_dentry)
goto out_iput;
sb->s_root = root_dentry;
/*
* Make up the files which will be in this filesystem, and we're done.
*/
lfs_create_files (sb, root_dentry);
return 0;

out_iput:
iput(root);
out:
return -ENOMEM;
}


/*
* Stuff to pass in when registering the filesystem.
*/
static struct super_block *lfs_get_super(struct file_system_type *fst,
int flags, const char *devname, void *data)
{
return get_sb_single(fst, flags, data, lfs_fill_super);
}

static struct file_system_type lfs_type = {
.owner = THIS_MODULE,
.name = "lwnfs",
.get_sb = lfs_get_super,
.kill_sb = kill_litter_super,
};




/*
* Get things set up.
*/
static int __init lfs_init(void)
{
return register_filesystem(&lfs_type);
}

static void __exit lfs_exit(void)
{
unregister_filesystem(&lfs_type);
}

module_init(lfs_init);
module_exit(lfs_exit);[/code]
文章评论

共有 0 条评论