通过锐捷认证了，为什么还不能上网？
以下为在终端显示的信息，请高手指点一下
谢谢！！！
（注：“***”为本人隐藏的个人信息，myxrgsu为我改名后的锐捷认证）
*********@*********-desktop: $ sudo myxrgsu -d
XRGSupplicant 1.1.1
Ruijie Network CopyRight 2004-2005
Please input your user name: *********
Please input your password:
Use default auth parameter,0-Use 1-UnUse(Default: 0):
Searching server...
Connecting server...
Authenticating...
Authenticate SUCCESSFULLY!
eth0: no process killed
There is already a pid file /var/run/dhclient.pid with pid 5559
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth0/00:50:ba:c1:9a:52
Sending on LPF/eth0/00:50:ba:c1:9a:52
Sending on Socket/fallback
DHCPREQUEST of ***.***.***.*** on eth0 to ***.***.***.*** port 67
DHCPACK of ***.***.***.*** from ***.***.***.***
bound to ***.***.***.*** -- renewal in 12770662 seconds.
Searching server...
Connecting server...
Authenticating...
Authenticate SUCCESSFULLY!
Please input 'unauth' to LogOff:
xiaoping2753 于 2008-11-02 16:18:19发表:
你是怎么能认证的啊，我的老是在最后一步鉴别失败，ip是正确的，是校园网DHCP分配的ip。
maitt 于 2008-10-06 23:19:55发表:
原来是我之前在代理IP那里填写了IP地址
现在问题解决了
不过好像还要进行静态的IP认证才能成功的
现在已经能够上网了
谢谢
zyf307 于 2008-10-06 23:08:48发表:
打开终端，输入 ifconfig -a 看看本地机器网卡是否分配到ip地址，如果没有，请手动添加。
仅供参考。
tJbwhy 于 2008-10-06 20:52:02发表:
锐捷不太清楚，让路