红联Linux门户
Linux帮助

Fedora21升级到Fedora22后,Samba(smb.service)无法启动

发布时间:2015-06-16 10:36:57来源:zh.arslanbar.net作者:巨大八爪鱼

执行:sudo gedit /var/log/samba/log.smbd
查看日志


日志内容如下:
[2015/06/14 16:10:48,  0] ../source3/smbd/server.c:1189(main)
smbd version 4.1.17 started.
Copyright Andrew Tridgell and the Samba Team 1992-2013
[2015/06/14 16:10:48,  0] ../source3/param/loadparm.c:3068(lp_set_enum_parm)
WARNING: Ignoring invalid value 'share' for parameter 'security'
[2015/06/14 16:10:48.864266,  0] ../source3/param/loadparm.c:3068(lp_set_enum_parm)
WARNING: Ignoring invalid value 'share' for parameter 'security'
[2015/06/14 16:10:48.876243,  0] ../source3/smbd/server.c:1269(main)
standard input is not a socket, assuming -D option
[2015/06/14 16:10:49.749090,  0] ../lib/util/become_daemon.c:136(daemon_ready)
STATUS=daemon 'smbd' finished starting up and ready to serve connectionsFailed to delete pidfile /run/smbd.pid. Error was No such file or directory
[2015/06/14 23:07:08,  0] ../source3/smbd/server.c:1241(main)
smbd version 4.2.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2014
[2015/06/14 23:07:08,  0] ../lib/param/loadparm.c:1067(lp_set_enum_parm)
WARNING: Ignoring invalid value 'share' for parameter 'security'
[2015/06/14 23:07:08,  0] ../source3/smbd/server.c:1256(main)
error opening config file '/etc/samba/smb.conf'
[2015/06/15 09:39:39,  0] ../source3/smbd/server.c:1241(main)
smbd version 4.2.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2014
[2015/06/15 09:39:43,  0] ../lib/param/loadparm.c:1067(lp_set_enum_parm)
WARNING: Ignoring invalid value 'share' for parameter 'security'
[2015/06/15 09:39:45,  0] ../source3/smbd/server.c:1256(main)
error opening config file '/etc/samba/smb.conf'
[2015/06/15 17:38:34,  0] ../source3/smbd/server.c:1241(main)
smbd version 4.2.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2014
[2015/06/15 17:38:35,  0] ../lib/param/loadparm.c:1067(lp_set_enum_parm)
WARNING: Ignoring invalid value 'share' for parameter 'security'
[2015/06/15 17:38:35,  0] ../source3/smbd/server.c:1256(main)
error opening config file '/etc/samba/smb.conf'
[2015/06/15 18:57:44,  0] ../source3/smbd/server.c:1241(main)
smbd version 4.2.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2014
[2015/06/15 18:57:44,  0] ../lib/param/loadparm.c:1067(lp_set_enum_parm)
WARNING: Ignoring invalid value 'share' for parameter 'security'
[2015/06/15 18:57:44,  0] ../source3/smbd/server.c:1256(main)
error opening config file '/etc/samba/smb.conf'
[2015/06/15 19:23:08,  0] ../source3/smbd/server.c:1241(main)
smbd version 4.2.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2014
[2015/06/15 19:23:08,  0] ../lib/param/loadparm.c:1067(lp_set_enum_parm)
WARNING: Ignoring invalid value 'share' for parameter 'security'
[2015/06/15 19:23:08,  0] ../source3/smbd/server.c:1256(main)
error opening config file '/etc/samba/smb.conf'


可见是打开/etc/samba/smb.conf这个文件出错!

因此,先备份/etc/samba/smb.conf到自己的目录下,然后删除原文件,複製一份Fedora Live CD启动后的/etc/samba/smb.conf覆盖回原系统,执行sudo systemctl start smb即可解决问题。


[原版smb.conf文件内容]
# This is the main Samba configuration file. For detailed information about the
# options listed here, refer to the smb.conf(5) manual page. Samba has a huge
# number of configurable options, most of which are not shown in this example.
#
# The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
# guides for installing, configuring, and using Samba:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# The Samba-3 by Example guide has working examples for smb.conf. This guide is
# generated daily: http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# In this file, lines starting with a semicolon (;) or a hash (#) are
# comments and are ignored. This file uses hashes to denote commentary and
# semicolons for parts of the file you may wish to configure.
#
# Note: Run the "testparm" command after modifying this file to check for basic
# syntax errors.
#
#---------------
# Security-Enhanced Linux (SELinux) Notes:
#
# Turn the samba_domain_controller Boolean on to allow Samba to use the useradd
# and groupadd family of binaries. Run the following command as the root user to
# turn this Boolean on:
# setsebool -P samba_domain_controller on
#
# Turn the samba_enable_home_dirs Boolean on if you want to share home
# directories via Samba. Run the following command as the root user to turn this
# Boolean on:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory, such as a new top-level directory, label it
# with samba_share_t so that SELinux allows Samba to read and write to it. Do
# not label system directories, such as /etc/ and /home/, with samba_share_t, as
# such directories should already have an SELinux label.
#
# Run the "ls -ldZ /path/to/directory" command to view the current SELinux
# label for a given directory.
#
# Set SELinux labels only on files and directories you have created. Use the
# chcon command to temporarily change a label:
# chcon -t samba_share_t /path/to/directory
#
# Changes made via chcon are lost when the file system is relabeled or commands
# such as restorecon are run.
#
# Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
# directories. To share such directories and only allow read-only permissions:
# setsebool -P samba_export_all_ro on
# To share such directories and allow read and write permissions:
# setsebool -P samba_export_all_rw on
#
# To run scripts (preexec/root prexec/print command/...), copy them to the
# /var/lib/samba/scripts/ directory so that SELinux will allow smbd to run them.
# Note that if you move the scripts to /var/lib/samba/scripts/, they retain
# their existing SELinux labels, which may be labels that SELinux does not allow
# smbd to run. Copying the scripts will result in the correct SELinux labels.
# Run the "restorecon -R -v /var/lib/samba/scripts" command as the root user to
# apply the correct SELinux labels to these files.
#
#--------------
#
#================ Global Settings ====================

[global]

# ----------------------- Network-Related Options -------------------------
#
# workgroup = the Windows NT domain name or workgroup name, for example, MYGROUP.
#
# server string = the equivalent of the Windows NT Description field.
#
# netbios name = used to specify a server name that is not tied to the hostname.
#
# interfaces = used to configure Samba to listen on multiple network interfaces.
# If you have multiple interfaces, you can use the "interfaces =" option to
# configure which of those interfaces Samba listens on. Never omit the localhost
# interface (lo).
#
# hosts allow = the hosts allowed to connect. This option can also be used on a
# per-share basis.
#
# hosts deny = the hosts not allowed to connect. This option can also be used on
# a per-share basis.
#
# max protocol = used to define the supported protocol. The default is NT1. You
# can set it to SMB2 if you want experimental SMB2 support.
#
workgroup = MYGROUP
server string = Samba Server Version %v

;    netbios name = MYSERVER

;    interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
;    hosts allow = 127. 192.168.12. 192.168.13.

;    max protocol = SMB2

# --------------------------- Logging Options -----------------------------
#
# log file = specify where log files are written to and how they are split.
#
# max log size = specify the maximum size log files are allowed to reach. Log
# files are rotated when they reach the size specified with "max log size".
#

# log files split per-machine:
log file = /var/log/samba/log.%m
# maximum size of 50KB per log file, then rotate:
max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# security = the mode Samba runs in. This can be set to user, share
# (deprecated), or server (deprecated).
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#

security = user
passdb backend = tdbsam

# ----------------------- Domain Members Options ------------------------
#
# security = must be set to domain or ads.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# realm = only use the realm option when the "security = ads" option is set.
# The realm option specifies the Active Directory realm the host is a part of.
#
# password server = only use this option when the "security = server"
# option is set, or if you cannot use DNS to locate a Domain Controller. The
# argument list can include My_PDC_Name, [My_BDC_Name], and [My_Next_BDC_Name]:
#
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
#
# Use "password server = *" to automatically locate Domain Controllers.

;    security = domain
;    passdb backend = tdbsam
;    realm = MY_REALM

;    password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# security = must be set to user for domain controllers.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# domain master = specifies Samba to be the Domain Master Browser, allowing
# Samba to collate browse lists between subnets. Do not use the "domain master"
# option if you already have a Windows NT domain controller performing this task.
#
# domain logons = allows Samba to provide a network logon service for Windows
# workstations.
#
# logon script = specifies a script to run at login time on the client. These
# scripts must be provided in a share named NETLOGON.
#
# logon path = specifies (with a UNC path) where user profiles are stored.
#
#
;    security = user
;    passdb backend = tdbsam

;    domain master = yes
;    domain logons = yes

# the following login script name is determined by the machine name
# (%m):
;    logon script = %m.bat
# the following login script name is determined by the UNIX user used:
;    logon script = %u.bat
;    logon path = \\%L\Profiles\%u
    # use an empty path to disable profile support:
;    logon path =

# various scripts can be used on a domain controller or a stand-alone
# machine to add or delete corresponding UNIX accounts:

;    add user script = /usr/sbin/useradd "%u" -n -g users
;    add group script = /usr/sbin/groupadd "%g"
;    add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
;    delete user script = /usr/sbin/userdel "%u"
;    delete user from group script = /usr/sbin/userdel "%u" "%g"
;    delete group script = /usr/sbin/groupdel "%g"

# ----------------------- Browser Control Options ----------------------------
#
# local master = when set to no, Samba does not become the master browser on
# your network. When set to yes, normal election rules apply.
#
# os level = determines the precedence the server has in master browser
# elections. The default value should be reasonable.
#
# preferred master = when set to yes, Samba forces a local browser election at
# start up (and gives itself a slightly higher chance of winning the election).
#
;    local master = no
;    os level = 33
;    preferred master = yes

#----------------------------- Name Resolution -------------------------------
#
# This section details the support for the Windows Internet Name Service (WINS).
#
# Note: Samba can be either a WINS server or a WINS client, but not both.
#
# wins support = when set to yes, the NMBD component of Samba enables its WINS
# server.
#
# wins server = tells the NMBD component of Samba to be a WINS client.
#
# wins proxy = when set to yes, Samba answers name resolution queries on behalf
# of a non WINS capable client. For this to work, there must be at least one
# WINS server on the network. The default is no.
#
# dns proxy = when set to yes, Samba attempts to resolve NetBIOS names via DNS
# nslookups.

;    wins support = yes
;    wins server = w.x.y.z
;    wins proxy = yes

;    dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# The options in this section allow you to configure a non-default printing
# system.
#
# load printers = when set you yes, the list of printers is automatically
# loaded, rather than setting them up individually.
#
# cups options = allows you to pass options to the CUPS library. Setting this
# option to raw, for example, allows you to use drivers on your Windows clients.
#
# printcap name = used to specify an alternative printcap file.
#

load printers = yes
cups options = raw

;    printcap name = /etc/printcap
# obtain a list of printers automatically on UNIX System V systems:
;    printcap name = lpstat
;    printing = cups

# --------------------------- File System Options ---------------------------
#
# The options in this section can be un-commented if the file system supports
# extended attributes, and those attributes are enabled (usually via the
# "user_xattr" mount option). These options allow the administrator to specify
# that DOS attributes are stored in extended attributes and also make sure that
# Samba does not change the permission bits.
#
# Note: These options can be used on a per-share basis. Setting them globally
# (in the [global] section) makes them the default for all shares.

;    map archive = no
;    map hidden = no
;    map read only = no
;    map system = no
;    store dos attributes = yes

#================= Share Definitions =================

[homes]
comment = Home Directories
browseable = no
writable = yes
;    valid users = %S
;    valid users = MYDOMAIN\%S

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
guest ok = no
writable = no
printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons:
;    [netlogon]
;    comment = Network Logon Service
;    path = /var/lib/samba/netlogon
;    guest ok = yes
;    writable = no
;    share modes = no

# Un-comment the following to provide a specific roving profile share.
# The default is to use the user's home directory:
;    [Profiles]
;    path = /var/lib/samba/profiles
;    browseable = no
;    guest ok = yes

# A publicly accessible directory that is read only, except for users in the
# "staff" group (which have write permissions):
;    [public]
;    comment = Public Stuff
;    path = /home/samba
;    public = yes
;    writable = yes
;    printable = no
;    write list = +staff


然后查看备份的文件,把需要的东西搬回来就行了。

# ----------------------- Standalone Server Options ------------------------
#
# security = the mode Samba runs in. This can be set to user, share
# (deprecated), or server (deprecated).
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#

security = share


问题就出在这裡!share在fedora22里才真deprecated,不能用了!
[octopus@pc3 Desktop]$ sudo systemctl restart smb
Job for smb.service failed. See "systemctl status smb.service" and "journalctl -xe" for details.
改成user就行了

fedora19~21目测都可以设置为share不影响使用,但fedora22再也不行了。


PS:日志文件裡面只显示:
[2015/06/15 22:56:47,  0] ../source3/smbd/server.c:1256(main)
error opening config file '/etc/samba/smb.conf'
让人还以为是文件权限的问题,结果他根本就不是权限的问题!而是security = share在fedora19-21可以使用,而在22中真正彻底无法使用了。


从Fedora 21升级到Fedora 22:http://www.linuxdiyf.com/linux/12406.html

安装Fedora 22后要做的事情:http://www.linuxdiyf.com/linux/12573.html

发布计划显示Fedora 23将在2015年10月27日正式推出:http://www.linuxdiyf.com/linux/12535.html